Mike Brady
1637a79dd6
Add tinyhttp code for sending and reading responses. Clean up some dacp routines. Most new and modified rooutines untested.
2017-12-18 18:50:01 +00:00
Mike Brady
86f76ad6ce
Improve the sync between AirPlay and movies like YouTube. Not sure we understand the negotiation for syncing.
2017-12-10 22:26:19 +00:00
Mike Brady
455d93485d
Quieten a warning from clang on FreeBSD
2017-11-25 20:46:37 +00:00
Mike Brady
3198ec4265
Improve dbus and add some dacp services
2017-11-12 14:26:10 +01:00
Mike Brady
827fa5a5b0
Clean up rtp_send_client_command a little
2017-11-06 09:05:22 +00:00
Belbo
b98e6a9ac0
Fixed race condition when stopping other threads with SIGUSR1
...
Many threads have a main loop that checks some exit variable in the loop condition. To stop a thread, another thread sets that exit variable, sends a SIGUSR1 to that thread to get it out of blocking calls like read(), write() or select(), and finally joins it.
There was a race condition though: if the signal arrived after the loop condition was checked but before the blocking system function was entered, the target thread essentially ignored the signal, made the blocking call anyway, and could get stuck forever there.
The only way around this race condition is to block SIGUSR1 in the destination thread during the critical time interval. This requires that the blocking system call and the call to unblock SIGUSR1 be an atomic unit. There is only one system call that makes this possible: pselect(), which takes a signal mask to replace the current signal mask with, but only while pselect() runs. Other functions like read(), recv(), write() and sendto() may only be called if we can be sure that they don't block. For this purpose, the file descriptors must be set to non-blocking mode and we must prepend the call to them with a call to pselect() to block until the socket becomes readable/writable.
2017-11-01 20:46:05 +01:00
Mike Brady
6467803858
Adjust the debug level of buffers exhausted and network condition messages.
2017-10-22 11:20:21 +02:00
Mike Brady
415b3f4ba9
Generalise volumeup to any command.
2017-10-15 13:08:21 +01:00
Mike Brady
b3a90f9d6d
Make the volumeup command work with IPv6 -- use the scope_id
2017-10-13 22:16:50 +01:00
Mike Brady
ce06d45033
Hook up "volumeup" remote control command -- doesn't work on ipv6, it seems
2017-10-09 22:14:34 +01:00
Mike Brady
1e0d0944c0
Tidy up configure.ac and drop old pulseaudio back end
2017-10-09 09:38:35 +01:00
Mike Brady
d343a851c0
Some spring cleaning using clang-format
2017-10-05 17:48:24 +01:00
Mike Brady
139c18bf3e
Add avahi code to look for the rmeote control information for the client and get the port number from it.
2017-10-05 17:39:32 +01:00
Mike Brady
3001f39bc5
3.1.2 pretty-print using clang-format
2017-09-07 12:02:00 +01:00
Mike Brady
965d9f63b1
Quieten some debug messages.
2017-08-27 17:01:18 +01:00
Mike Brady
d3148eb464
Improve handling of player lock and simplify handling of loss of connection and improve some debug messages
2017-08-27 12:43:42 +01:00
Mike Brady
15ba732458
Change behaviour when TEARDOWN is received -- don't close down the RTSP conversation, but wait for it to be closed. Add more debug messages.
2017-08-25 10:33:17 +01:00
Mike Brady
ee8629be2b
Add more thread numbers
2017-08-23 12:45:57 +01:00
Mike Brady
abd342553a
Add index numbers for each RTSP conversation thread, to help figure debug messages out better.
2017-08-21 18:08:41 +02:00
Mike Brady
e513e5330c
Tidy up source using clang-format
2017-07-31 11:57:57 +02:00
Mike Brady
555c0c738b
Fix off-by-one error in enumatering UDP ports in the port_range. Make the error message a little more useful.
2017-04-16 17:09:59 +01:00
Mike Brady
9a8a0f0764
Make this threadsafe and modify the clock drift diagnostics
2017-04-07 18:37:44 +01:00
Mike Brady
672c84c728
Make rtp stuff thread-safe -- remove all globals
2017-03-16 15:47:07 +00:00
Mike Brady
04cb1d0998
deglobalise sockets and reference timestamp
2017-03-16 15:29:16 +00:00
Mike Brady
9efeefdda7
deglobalise self_scope_id for ipv6
2017-03-16 15:09:03 +00:00
Mike Brady
4fdc9d70eb
deglobalise client_ip_string and self_ip_string
2017-03-16 15:05:55 +00:00
Mike Brady
f3d85bc71a
Deglobalise rtp_running, make rtp timing sender use the conn data strucutre
2017-03-16 15:01:08 +00:00
Mike Brady
e4d5570eee
Add rtp init and terminate, mirror all globals in the conn data structure
2017-03-16 13:19:38 +00:00
Mike Brady
728d3d4956
add conn to many procedure calls
2017-03-16 12:33:56 +00:00
Mike Brady
755e95904c
De globalise everything except ab_read and ab_write and the volume control stuff
2017-03-10 17:44:50 +00:00
Mike Brady
05305e1581
De-globalise input_bytes_per_frame,output_bytes_per_frame,output_sample_ratio,max_frame_size_change,decoder_info,shutdown_requested,connection_state_to_output,player_thread_please_stop
2017-03-09 16:10:39 +00:00
Mike Brady
7d672bcf56
Untested, probably not working
2017-03-07 22:42:23 +00:00
Mike Brady
9e43f8a7d6
Move to version 3.0
2017-02-24 21:39:02 +00:00
Mike Brady and GitHub
71e7dc0e93
Fix small bug
...
Thanks to @jief666 for the fix.
2017-01-21 17:30:11 +00:00
Jief
21025440af
clock_drift could be left uninitialized.
...
clock_drift redeclared instead of initialized with "uint64_t clock_drift
= 0".
I think this is the correction.
2016-11-11 19:16:47 +01:00
Jief
cf56dc3707
Using Macro instead of LL to make it portable.
2016-11-02 14:58:02 +01:00
Jief
d6f1b35748
constant 0x100000000 should be 0x100000000LL to avoid warning
2016-11-01 13:52:38 +01:00
Mike Brady
064bd293c5
Tidy up with a clang-format
2016-09-11 10:35:53 +01:00
Mike Brady
ef851a927b
Enable 64-bit monotonic rtptime calculations
2016-09-02 16:53:52 +01:00
Edward Barnard
f2c784c74d
Ensure scope_id is set correctly for ipv6 timing and control sockets
2016-07-09 18:38:36 +02:00
Mike Brady
284dfb94bf
Add scope_id to information used to bind an outgoing IPv6 port. Makes it work with link-local addresses.
2016-05-13 16:32:13 +00:00
Mike Brady
76724fd06d
Fix omitted line.
...
Thanks to https://github.com/ejurgensen
2016-05-02 21:46:08 +01:00
Mike Brady
bbff2d1efb
Get IPv6 working properly
2016-05-02 13:58:17 +01:00
Mike Brady
1fd794af71
tidy up diagnostic messages
2016-05-02 09:45:44 +01:00
Mike Brady
5028cd1f9f
Add information about local ip address so we can send back connections to the client from the same ip number it used to contact us
2016-05-01 22:37:57 +01:00
Mike Brady
a7682415f1
Comment out the use of the delay() function, and update is to the new signature anyway.
2016-03-29 16:08:15 +00:00
Mike Brady
1dde99daff
demote debug info about network
2016-03-27 16:32:24 +00:00
Mike Brady
1805fdb867
Get packet stats at debug level 1
2016-03-26 22:26:52 +00:00
Mike Brady
b608655c71
Add comment that get_reference_timestamp_stuff is okay type-wise
2016-03-26 21:42:14 +00:00
Mike Brady
95f1689858
Quieten an out-of-sequence message
2016-02-29 15:15:55 +00:00
Mike Brady
Belbo
Jief
Edward Barnard