Mike Brady
54d761ff7d
Clean up some of the wording and layout of the configuration file
...
Clean up and improve the way lead-in sillence is used to give a more accurate sync time to the first packet of audio.
Allow very good sync to occur with 0.3 seconds of lead-in silence.
Improve the use of the buffer offset.
Format some other files.
2020-05-18 16:55:09 +01:00
Mike Brady
a6acb6062a
If the DACP port is zero, do a zeroconf re-broswe every two seconds in case it has been missed.
2020-03-25 10:16:21 +00:00
Mike Brady
67e9b1b6cd
partial move to using a nanosecond-based system timer. More to come.
2020-02-24 19:40:44 +00:00
Mike Brady
f771774519
Compiles under gcc-10 with -fno-common
2020-02-13 17:37:41 +00:00
Mike Brady
27e42a666a
Store the UserAgent so as to recognise forked-daapd so as to always send a revision_number of 1 when asking for playerstatus of forked-daapd.
2020-01-10 17:20:25 +00:00
Mike Brady
e0ffb18dbf
Modify behaviour when receiving an invalid RTSP packet to be the same as a genuine AirPort Express, but time out after two minutes anyway. Also move the retain_artwork flag to diagnostics.
2019-10-26 16:11:54 +01:00
Mike Brady
eec0639726
Fix crash when a non-RTSP packet is sent to the session's RTSP port.
2019-10-26 10:40:10 +01:00
Mike Brady
686fc2a5c1
Add missing frame status field, fix a bug with the first missing frame variable, expose the settings for resending, remove some commented out code.
2019-10-10 09:23:20 +01:00
Angus71
bf4bd8ef04
Clean up
2019-08-25 09:50:40 +02:00
Angus71
333e3904e7
Fixed seg. fault with ALAC and incomplete a:fmtp
2019-08-24 22:02:33 +02:00
Chris Boot
b9cf91b2bb
More typo fixes across the tree
...
Previously I have made spelling changes as caught by Debian's lintian
tool, which has a short list of common misspellings that it tests for.
This time I decided to run codespell against the source and fix all the
obvious problems it came up with. It also uses a list of misspellings
but it's much larger than lintian's, but also has some false positives
so I went over the list by hand.
The command I used to do check the source was:
git ls-tree -rz --name-only HEAD | xargs -0 codespell -L minimise,errorstring
2019-07-27 00:05:38 -03:00
Mike Brady
175ae0a650
Fix a bug that sometimes caused a crash when a service name was specified in the configuration file. The fix was to be more systematic in allocating and deallocating memory for termporary strings. Thanks to Chris Boot, Ari Sovijarvi and Jeroen Massar for the bug report. Fixes Debian Bug report #925577 .
...
Allow the rtsp_listen_loop to exit if the RTSP port (usually port 5000) is not available. This allows the system to exit cleanly rather than abort.
2019-07-21 09:06:37 +02:00
Mike Brady
83c0405d03
Add automatic bit depth and speed selection for alsa devices. Set rate and format to "auto" by default. Always look for the greatest bit depth, but the lowest multiple of 44,100.
...
Improve support for big-endian CPUs by adding support for explicit -endian formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE.
For the "disable_standby_mode" setting, change "while_active" to "auto".
2019-05-07 10:19:04 +01:00
Mike Brady
d883575916
Add tentative raw PCM input facility. Clean up some messages.
2019-03-27 11:44:58 +00:00
Mike Brady
5a7b7c011b
Add the ability to receive uncompressed 16 bit big-endian (?) / 44,100 fps / interleaved stereo PCM.
2019-03-18 11:21:27 +00:00
Mike Brady
89340f20c9
3.3 release candidate 0
2019-03-04 12:38:20 +00:00
Mike Brady
621f70a4df
Remove a change that proved unnecessary to replay a write() with a non-blocking write().
2019-02-27 11:58:03 +00:00
Mike Brady
20967812ad
Fix a bug in the activity_monitor software that could lock up a player thread so that it couln't be cancelled. If a player was cancelled while performing an activity script, the activity_monitor_mutex would remain locked.
2019-02-26 15:23:11 +00:00
Mike Brady
b26d815529
Add indication of dacp-id, source and self IP numbers to some diagnostics.
2019-02-25 11:38:08 +00:00
Mike Brady
ca325d0459
Fix an error in non_blocking_write, expose a more general version of it, use it when writing an RTSP response with a three-second timeout.
2019-02-24 13:16:55 +00:00
Mike Brady
cae8bc0f3c
Stop increasing the debugging verbosity when a watchdog timeout occurs
2019-02-17 10:13:48 +00:00
Mike Brady
405a028f33
quieten some exiting debug messages
2019-02-16 19:44:25 +00:00
Mike Brady
617d4bc228
Turn up debug level to 3 when too long a silence occurs
2019-02-16 14:56:34 +00:00
Mike Brady
79e22063ef
check that the systems are started before trying to stop them, duh.
2019-02-05 15:51:16 +00:00
Mike Brady
9239a7c56e
Include the mbedtls version.h file so that conditional compilation can be done right
2019-02-02 15:27:26 +00:00
Mike Brady
4fb88a3aa5
allow for updated or old mbedtls library
2019-02-02 15:03:27 +00:00
Mike Brady
cf03983694
Fix warnings about deprecated mbedtls API calls
2019-02-02 13:05:49 +00:00
Mike Brady
08e84ece27
add a volume control mutex to serialise multiple attempts to change the volume
2019-02-01 21:07:13 +00:00
Mike Brady
02bc269a4a
Fix a situation where cancellation could lose a malloced buffer.
2019-02-01 16:17:53 +00:00
Mike Brady
c807513422
quieten a few debug messages, bring a standard one forward.
2019-01-24 16:33:50 +00:00
Mike Brady
2e4428538d
Add an "active" mode that can time out after a period -- 10 seconds by default -- after play ends.
2019-01-21 21:43:55 +00:00
Mike Brady
604ca8dee4
Hook up active mode stuff to metadata, add two four-char codes, improve external command calling.
2019-01-21 21:18:40 +00:00
Mike Brady
61c870bac1
make OpenSSL routines un-cancellable, in case there is a possible memory leak
2019-01-18 16:32:31 +00:00
Mike Brady
4483037719
Block on command_execute for unfixable errors.
2019-01-15 08:30:00 +00:00
Mike Brady
68f20fe8db
Add an error message if an RTSP thread can not be created.
2019-01-13 13:14:39 +00:00
Mike Brady
93cae8a5d1
Quieten the msg_ debug messages.
2019-01-13 10:17:34 +00:00
Mike Brady
9fbdc062b4
Change how rtsp_messages are memory managed. Add some diagnostics.
2019-01-12 21:44:52 +00:00
Mike Brady
ca72645cb8
If a message is dropped because the pc queue is busy, free any data that might be associated with it as well as just the rtsp message.
2019-01-12 19:17:43 +00:00
Mike Brady
c3668b3fc0
INcrease the delay between reading chunks of the RTSP message, may it less likely to overwhelm the CPU.
2019-01-08 13:00:00 +00:00
Mike Brady
c35fb69e33
Fix parsing error with progress 'prgr' metadata
2019-01-03 10:48:54 +00:00
Mike Brady
ad6c721d5a
Format
2018-12-27 14:04:31 +00:00
Mike Brady
6e5f84d2a0
Always leave space for, and put a NULL at the end of an RTSP packet.
2018-12-27 13:59:20 +00:00
Mike Brady
4046c0e73d
Fix dither, add dither to silences during lead-in, interpolatied frames and keeping out of standby, only if the output device doesn't use a mixer. Check configuration at initialisation.
2018-12-14 15:07:00 +00:00
Mike Brady
7cc434e989
Experimentally, add the ability to prevent the DAC making popping noises by feeding it with silence instead of allowing it to stop.
2018-12-13 14:47:52 +00:00
Mike Brady
e454572dc7
Further debug tidy-ups and update the configuration file.
2018-12-11 11:26:39 +00:00
Mike Brady
45ce909214
Tidy up some debug messages and warnings, remove old diagnostic codes and settings.
2018-12-11 10:56:36 +00:00
Mike Brady
9d5ff22f2d
Connect up the stall response to the external command calling -- add a single argument to the unfixable error call.
2018-12-10 22:28:52 +00:00
Mike Brady
e5452e5172
Make the idle timeout on the RTSP link the same as the overall timeout -- 30 seconds is a bit short. Add checks to the alsa interface timing -- 15 ms to write a packet of frames, 1 ms to ask for the delay.
2018-12-08 14:12:33 +00:00
Mike Brady
277d401d24
Ensure watchdog always starts with the starting time of the thread. Add watchdog bark count. On the third bark, execute an unfixable error script if present.
2018-12-04 17:25:15 +00:00
Mike Brady
67d2a4b5d9
Add a 30 second timout on the read function on an RTSP thread.
2018-12-03 18:42:49 +00:00
Mike Brady
Mike Brady
Angus71
Chris Boot