Tidy up some debug messages and warnings, remove old diagnostic codes and settings.
This commit is contained in:
+15
-69
@@ -75,9 +75,9 @@ audio_output audio_alsa = {
|
||||
static pthread_mutex_t alsa_mutex = PTHREAD_MUTEX_INITIALIZER;
|
||||
|
||||
// for tracking how long the output device has stalled
|
||||
uint64_t stall_monitor_start_time; // zero if not initialised / not started / zeroed by flush
|
||||
long stall_monitor_frame_count; // set to delay at start of time, incremented by any writes
|
||||
int stall_monitor_error_notified;
|
||||
uint64_t stall_monitor_start_time; // zero if not initialised / not started / zeroed by flush
|
||||
long stall_monitor_frame_count; // set to delay at start of time, incremented by any writes
|
||||
uint64_t stall_monitor_error_threshold; // if the time is longer than this, it's an error
|
||||
|
||||
static snd_output_t *output = NULL;
|
||||
static unsigned int desired_sample_rate;
|
||||
@@ -221,9 +221,7 @@ static int init(int argc, char **argv) {
|
||||
config.audio_backend_latency_offset = 0;
|
||||
config.audio_backend_buffer_desired_length = 0.15;
|
||||
|
||||
config.alsa_maximum_write_time = 0.016; // 16 milliseconds -- if it takes longer, we need to know
|
||||
config.alsa_maximum_interface_response_time =
|
||||
0.001; // one millisecond -- if it takes longer, we need to know
|
||||
config.alsa_maximum_stall_time = 0.200; // 200 milliseconds -- if it takes longer, it's a problem
|
||||
|
||||
// get settings from settings file first, allow them to be overridden by
|
||||
// command line options
|
||||
@@ -382,25 +380,14 @@ static int init(int argc, char **argv) {
|
||||
}
|
||||
}
|
||||
|
||||
/* Get the optional alsa_maximum_interface_response_time setting. */
|
||||
if (config_lookup_float(config.cfg, "alsa.maximum_interface_response_time", &dvalue)) {
|
||||
if (dvalue < 0.0) {
|
||||
warn("Invalid alsa maximum interface response time setting \"%f\". It "
|
||||
"must be greater than 0. Default is \"%f\". No setting is made.",
|
||||
dvalue, config.alsa_maximum_interface_response_time);
|
||||
} else {
|
||||
config.alsa_maximum_interface_response_time = dvalue;
|
||||
}
|
||||
}
|
||||
|
||||
/* Get the optional alsa_maximum_write_time setting. */
|
||||
if (config_lookup_float(config.cfg, "alsa.maximum_write_time", &dvalue)) {
|
||||
/* Get the optional alsa_maximum_stall_time setting. */
|
||||
if (config_lookup_float(config.cfg, "alsa.maximum_stall_time", &dvalue)) {
|
||||
if (dvalue < 0.0) {
|
||||
warn("Invalid alsa maximum write time setting \"%f\". It "
|
||||
"must be greater than 0. Default is \"%f\". No setting is made.",
|
||||
dvalue, config.alsa_maximum_write_time);
|
||||
dvalue, config.alsa_maximum_stall_time);
|
||||
} else {
|
||||
config.alsa_maximum_write_time = dvalue;
|
||||
config.alsa_maximum_stall_time = dvalue;
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -943,7 +930,10 @@ static void start(int i_sample_rate, int i_sample_format) {
|
||||
|
||||
stall_monitor_start_time = 0;
|
||||
stall_monitor_frame_count = 0;
|
||||
stall_monitor_error_notified = 0;
|
||||
|
||||
stall_monitor_error_threshold =
|
||||
(uint64_t)1000000 * config.alsa_maximum_stall_time; // stall time max to microseconds;
|
||||
stall_monitor_error_threshold = (stall_monitor_error_threshold << 32) / 1000000; // now in fp form
|
||||
}
|
||||
|
||||
// assuming pthread cancellation is disabled
|
||||
@@ -984,7 +974,6 @@ int my_snd_pcm_delay(snd_pcm_t *pcm, snd_pcm_sframes_t *delayp) {
|
||||
}
|
||||
|
||||
int delay(long *the_delay) {
|
||||
uint64_t overall_time_before = get_absolute_time_in_fp();
|
||||
*the_delay = 0;
|
||||
// snd_pcm_sframes_t is a signed long -- hence the return of a "long"
|
||||
int reply = 0;
|
||||
@@ -998,10 +987,8 @@ int delay(long *the_delay) {
|
||||
int derr;
|
||||
snd_pcm_state_t dac_state = snd_pcm_state(alsa_handle);
|
||||
if (dac_state == SND_PCM_STATE_RUNNING) {
|
||||
*the_delay = 0; // just to see what happens
|
||||
uint64_t time_before = get_absolute_time_in_fp();
|
||||
|
||||
reply = snd_pcm_delay(alsa_handle, the_delay);
|
||||
uint64_t response_time = get_absolute_time_in_fp() - time_before;
|
||||
|
||||
if (reply != 0) {
|
||||
debug(1, "Error %d in delay(): \"%s\". Delay reported is %d frames.", reply,
|
||||
@@ -1020,15 +1007,6 @@ int delay(long *the_delay) {
|
||||
measurement_data_is_valid = 0;
|
||||
}
|
||||
}
|
||||
uint64_t maximum_permitted_response_time =
|
||||
(uint64_t)(config.alsa_maximum_interface_response_time * 1000000); // microseconds
|
||||
maximum_permitted_response_time = (maximum_permitted_response_time << 32) / 1000000;
|
||||
if (response_time > maximum_permitted_response_time) {
|
||||
debug(3, "Maximum response time of %8.2f us exceeded reading delay. Response time was "
|
||||
"%12.2f us.",
|
||||
(1000000.0 * maximum_permitted_response_time) / (uint64_t)0x100000000,
|
||||
(1000000.0 * response_time) / (uint64_t)0x100000000);
|
||||
}
|
||||
} else {
|
||||
reply = -EIO; // shomething is wrong
|
||||
frame_index = 0; // we'll be starting over...
|
||||
@@ -1060,23 +1038,12 @@ int delay(long *the_delay) {
|
||||
// reply = -EIO; // pretend something bad has happened
|
||||
pthread_setcancelstate(oldState, NULL);
|
||||
}
|
||||
debug(3, "Total playing time to get delay of %d frames: %8.2f us.", *the_delay,
|
||||
(1000000.0 * (get_absolute_time_in_fp() - overall_time_before) / (uint64_t)0x100000000));
|
||||
|
||||
if ((reply == 0) && (*the_delay != 0)) {
|
||||
uint64_t stall_monitor_time_now = get_absolute_time_in_fp();
|
||||
if ((stall_monitor_start_time != 0) && (stall_monitor_frame_count == *the_delay)) {
|
||||
// hasn't outputted anything since the last call to delay()
|
||||
int64_t time_stalled = stall_monitor_time_now - stall_monitor_start_time;
|
||||
int64_t stall_monitor_error_threshold = 200000; // microseconds;
|
||||
stall_monitor_error_threshold =
|
||||
(stall_monitor_error_threshold << 32) / 1000000; // now in fp form
|
||||
uint64_t time_stalled = stall_monitor_time_now - stall_monitor_start_time;
|
||||
if (time_stalled > stall_monitor_error_threshold) {
|
||||
if (stall_monitor_error_notified == 0) {
|
||||
debug(1, "alsa output device stalled -- no output in %8.2f us.",
|
||||
(1000000.0 * stall_monitor_error_threshold) / (uint64_t)0x100000000);
|
||||
stall_monitor_error_notified = 1;
|
||||
}
|
||||
reply = sps_extra_errno_output_stalled;
|
||||
}
|
||||
} else {
|
||||
@@ -1106,7 +1073,6 @@ int get_rate_information(uint64_t *elapsed_time, uint64_t *frames_played) {
|
||||
}
|
||||
|
||||
static int play(void *buf, int samples) {
|
||||
uint64_t overall_time_before = get_absolute_time_in_fp();
|
||||
// debug(3,"audio_alsa play called.");
|
||||
int oldState;
|
||||
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &oldState); // make this un-cancellable
|
||||
@@ -1114,10 +1080,7 @@ static int play(void *buf, int samples) {
|
||||
if (alsa_handle == NULL) {
|
||||
|
||||
pthread_cleanup_debug_mutex_lock(&alsa_mutex, 10000, 1);
|
||||
overall_time_before = get_absolute_time_in_fp();
|
||||
ret = actual_open_alsa_device();
|
||||
debug(3, "Opening time: %8.2f us.",
|
||||
(1000000.0 * (get_absolute_time_in_fp() - overall_time_before) / (uint64_t)0x100000000));
|
||||
if (ret == 0) {
|
||||
if (audio_alsa.volume)
|
||||
do_volume(set_volume);
|
||||
@@ -1151,12 +1114,8 @@ static int play(void *buf, int samples) {
|
||||
if ((samples != 0) && (buf != NULL)) {
|
||||
// debug(3, "write %d frames.", samples);
|
||||
|
||||
uint64_t maximum_permitted_writing_time = (config.alsa_maximum_write_time * 1000000000);
|
||||
maximum_permitted_writing_time = (maximum_permitted_writing_time << 32) / 1000000000;
|
||||
|
||||
overall_time_before = get_absolute_time_in_fp();
|
||||
err = alsa_pcm_write(alsa_handle, buf, samples);
|
||||
uint64_t writing_time = get_absolute_time_in_fp() - overall_time_before;
|
||||
|
||||
stall_monitor_frame_count += samples;
|
||||
|
||||
if (err < 0) {
|
||||
@@ -1171,13 +1130,6 @@ static int play(void *buf, int samples) {
|
||||
err, samples, snd_strerror(err));
|
||||
}
|
||||
|
||||
if (writing_time > maximum_permitted_writing_time) {
|
||||
debug(3, "Taking too long to write %d samples. Playing time: %8.2f us, writing time: "
|
||||
"%8.2f us.",
|
||||
samples, (1000000.0 * maximum_permitted_writing_time) / (uint64_t)0x100000000,
|
||||
(1000000.0 * writing_time) / (uint64_t)0x100000000);
|
||||
}
|
||||
|
||||
if (frame_index == 0) {
|
||||
frames_sent_for_playing = samples;
|
||||
} else {
|
||||
@@ -1234,14 +1186,10 @@ static int play(void *buf, int samples) {
|
||||
pthread_cleanup_pop(0); // release the mutex
|
||||
}
|
||||
pthread_setcancelstate(oldState, NULL);
|
||||
debug(3, "Total playing time to write %d samples: %8.2f us.", samples,
|
||||
(1000000.0 * (get_absolute_time_in_fp() - overall_time_before) / (uint64_t)0x100000000));
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void flush(void) {
|
||||
uint64_t overall_time_before = get_absolute_time_in_fp();
|
||||
// debug(2,"audio_alsa flush called.");
|
||||
int oldState;
|
||||
pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, &oldState); // make this un-cancellable
|
||||
@@ -1267,8 +1215,6 @@ static void flush(void) {
|
||||
debug_mutex_unlock(&alsa_mutex, 3);
|
||||
pthread_cleanup_pop(0); // release the mutex
|
||||
pthread_setcancelstate(oldState, NULL);
|
||||
debug(3, "Total playing time to flush: %8.2f us.",
|
||||
(1000000.0 * (get_absolute_time_in_fp() - overall_time_before) / (uint64_t)0x100000000));
|
||||
}
|
||||
|
||||
static void stop(void) {
|
||||
|
||||
@@ -187,8 +187,7 @@ typedef struct {
|
||||
float loudness_reference_volume_db;
|
||||
int alsa_use_hardware_mute;
|
||||
|
||||
double alsa_maximum_interface_response_time;
|
||||
double alsa_maximum_write_time;
|
||||
double alsa_maximum_stall_time;
|
||||
|
||||
#if defined(CONFIG_DBUS_INTERFACE)
|
||||
enum dbus_session_type dbus_service_bus_type;
|
||||
|
||||
@@ -1079,16 +1079,9 @@ static abuf_t *buffer_get_frame(rtsp_conn_info *conn) {
|
||||
(conn->unfixable_error_reported == 0)) {
|
||||
conn->unfixable_error_reported = 1;
|
||||
if (config.cmd_unfixable) {
|
||||
warn("Connection %d: An unfixable error has been detected -- output device "
|
||||
"is stalled. Executing the "
|
||||
"\"run_this_if_an_unfixable_error_is_detected\" command.",
|
||||
conn->connection_number);
|
||||
command_execute(config.cmd_unfixable, "output_device_stalled");
|
||||
} else {
|
||||
warn("Connection %d: An unfixable error has been detected -- output device "
|
||||
"is stalled. \"No "
|
||||
"run_this_if_an_unfixable_error_is_detected\" command provided -- "
|
||||
"nothing done.",
|
||||
warn("An unfixable error, \"output_device_stalled\", has been detected.",
|
||||
conn->connection_number);
|
||||
}
|
||||
}
|
||||
|
||||
@@ -293,15 +293,10 @@ void *player_watchdog_thread_code(void *arg) {
|
||||
} else if (conn->watchdog_barks == 3) {
|
||||
if ((config.cmd_unfixable) && (conn->unfixable_error_reported == 0)) {
|
||||
conn->unfixable_error_reported = 1;
|
||||
warn("Connection %d: An unfixable error has been detected -- can't stop a play "
|
||||
"session. Executing the "
|
||||
"\"run_this_if_an_unfixable_error_is_detected\" command.",
|
||||
conn->connection_number);
|
||||
command_execute(config.cmd_unfixable, "unable_to_cancel_play_session");
|
||||
} else {
|
||||
warn("Connection %d: An unfixable error has been detected -- can't stop a play "
|
||||
"session. \"No "
|
||||
"run_this_if_an_unfixable_error_is_detected\" command provided -- nothing done.",
|
||||
warn("Connection %d: An unfixable error, code \"unable_to_cancel_play_session\" has "
|
||||
"been detected.",
|
||||
conn->connection_number);
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user