nils/shairport-sync
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
4,927 Commits 1 Branch 0 Tags
38bbad6f63a720bf51c712c0d232794a519792b1
Commit Graph
200 Commits
Author SHA1 Message Date
Mike Brady 38bbad6f63 Remove the requirement for Avahi in the systemd startup file unless Avahi is included in the build. 2022-04-05 07:22:34 +01:00
Mike Brady fbe0565a68 Remove the illegal "Provides" entry. 2022-03-11 09:38:59 +11:00
Mike Brady afc82b1800 Declare the service provided. 2022-02-28 18:04:55 +11:00
Mike Brady 0aea810735 experiment with different startup regimes 2022-02-28 10:59:41 +11:00
Mike Brady 3d720d65bf MQTT -- add code to deal with empty payloads by adding a dummy payload to empty messages by default. 2022-02-07 12:36:08 +00:00
Mike Brady 6ced6bc67d Add a "mixer_control_index" setting to the "alsa" part of ther configuration file. A mixer is fully identified by a name and index, duh. Change some debug messages and add an entry to the sample configuration file. 2022-01-21 18:18:13 +01:00
Mike Brady 5617f40edd Update the documentation a little. 2021-12-24 11:22:27 +00:00
Mike Brady 1997f16fba Allow the airplay_device_id to be varied either by adding an offset or by replacing it completely. 2021-12-24 11:03:19 +00:00
Mike Brady 953ad8ac14 Move AP2 player termination code from handle_teardown into the player cleanup function so that cancelling the player thread cleans up properly. 2021-05-08 17:46:13 +01:00
Mike Brady 8de7f34611 fix typo 2021-03-27 14:20:22 +00:00
Mike BradyandGitHub 91adfedfd2 Update shairport-sync.conf 2021-03-07 11:18:56 +00:00
Mike BradyandGitHub c5a3b438ff Update shairport-sync.conf 2021-03-07 11:17:06 +00:00
Mike Brady 485e18db17 Add a default name for the pipe backend: /tmp/shairport-sync-audio 2020-09-11 17:31:55 +01:00
Mike Brady f266e4c08b Allow Shairport Sync native D-Bus and MPRIS services to be owned by root as well as user "shairport-sync" 2020-06-21 09:57:05 +01:00
Mike Brady c0e5d0473e Add the ability to direct logs etc. to a file or pipe. 2020-05-28 12:19:59 +01:00
Mike Brady 6406c296f5 Add setting to direct logs to syslog, STDERR or STDOUT 2020-05-27 16:21:35 +01:00
Mike Brady 54d761ff7d Clean up some of the wording and layout of the configuration file 
Clean up and improve the way lead-in sillence is used to give a more accurate sync time to the first packet of audio.
Allow very good sync to occur with 0.3 seconds of lead-in silence.
Improve the use of the buffer offset.
Format some other files.
 2020-05-18 16:55:09 +01:00
Mike Brady 012dd26c77 Add the ability to set the silent lead-in parameters initial_period, minimum number of adjustments and adjustment interval, and give them sensible defaults. 2020-05-17 12:48:25 +01:00
Mike Brady 18749bc315 Add brief message about finding ALSA devices. 2020-05-16 12:49:00 +01:00
Mike Brady a4edc649f8 Add code to do calculations involving the audio_backend_latency_offset_in_seconds and audio_backend_silent_lead_in_time settings correctly. Clean up the audio_backend_silent_lead_in_time setting by adding an "auto" setting. 2020-05-16 12:23:08 +01:00
Guillaume Revaillot aacc4e802b Allow to specify pulseaudio server instead of using default one. 
Add "server" entry to pa config section, allowing to connect to a remote or a local system
pulseaudio instance instead of letting pulseaudio choose.
 2020-03-27 09:39:11 +01:00
Mike Brady 1b7e23c093 Add ability to set the missing DACP port scan interval. 2020-03-25 10:40:05 +00:00
Pieter De GendtandPieter De Gendt 32646f22e2 jack: Rename soxr "recipe" to "quality" and configurable buffer size 2019-12-23 09:10:08 +01:00
Mike Brady e0ffb18dbf Modify behaviour when receiving an invalid RTSP packet to be the same as a genuine AirPort Express, but time out after two minutes anyway. Also move the retain_artwork flag to diagnostics. 2019-10-26 16:11:54 +01:00
Mike BradyandGitHub 9745d794c9 Update shairport-sync.conf 2019-10-24 10:35:27 +01:00
Mike Brady 6c57ce97d5 Add two cover_art control settings -- the cache directory to use, (or the empty string to prevent caching) and a flag to retain all art work 2019-10-20 15:43:31 +01:00
Mike Brady 686fc2a5c1 Add missing frame status field, fix a bug with the first missing frame variable, expose the settings for resending, remove some commented out code. 2019-10-10 09:23:20 +01:00
Mike Brady db8f10cfa1 add the option (normally on) of including the file name and line number of the originrating message in a debug log message 2019-09-17 12:14:55 +01:00
Chris Boot b9cf91b2bb More typo fixes across the tree 
Previously I have made spelling changes as caught by Debian's lintian
tool, which has a short list of common misspellings that it tests for.
This time I decided to run codespell against the source and fix all the
obvious problems it came up with. It also uses a list of misspellings
but it's much larger than lintian's, but also has some false positives
so I went over the list by hand.

The command I used to do check the source was:
git ls-tree -rz --name-only HEAD | xargs -0 codespell -L minimise,errorstring
 2019-07-27 00:05:38 -03:00
Mike Brady a8faacd3fc Expose some of the settings used in the disable_standby_mode. 
Specifically, firstly, the disable_standby_mode_silence_threshold, which is the
amount of audio in the output device's hardware buffer. It should normally
be close to the value givein in the audio_backend_buffer_desired_length_in_seconds
setting. If it drops to this value, silence is added to the buffer to prevent
the output device from becoming idle.

Secondly, the disable_standby_mode_silence_scan_interval is the time between checks
of the output device's hardware buffer.

The code for generating frames of possibly-dithered silence has been simplified.
 2019-06-20 10:45:27 +01:00
Mike BradyandGitHub 7fc977d8d3 Change comments for use_precision_timing 2019-06-17 22:44:12 +01:00
Mike Brady 76ad4e6a73 enable specification of specific formats and/or speeds to turn off automatic format/speed selection, fixing a bug. Clarify some of the warnings. Fix a few typos in the configuration file sample. 2019-05-29 16:00:47 +01:00
David Crook 19fbededcf mqtt port config changes 
1. update example shairport-sync.conf file
2. update config file mqtt port parsing

Signed-off-by: David Crook <idcrook@users.noreply.github.com>
 2019-05-25 13:01:22 -06:00
Mike Brady d9168f4aa7 remove a strncpy truncation warning 
update a timing setting in the settings file
list the alsa hardware devices in the -h message
 2019-05-17 10:43:54 +01:00
Mike Brady 83c0405d03 Add automatic bit depth and speed selection for alsa devices. Set rate and format to "auto" by default. Always look for the greatest bit depth, but the lowest multiple of 44,100. 
Improve support for big-endian CPUs by adding support for explicit -endian formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE.

For the "disable_standby_mode" setting, change "while_active" to "auto".
 2019-05-07 10:19:04 +01:00
Mike Brady 1d32976d07 Improve support for bigendian devices. Add support for S16_LE, S16_BE, S24_LE, S24_BE, S32_LE and S32_BE formats. Make the default S16_LE. Allow precision timing only on alsa devices with names beginning with "hw:". Use snd_pcm_hw_params_is_monotonic() to see if clock is monotonic. 2019-05-01 11:01:15 +01:00
Mike Brady 9aa8f91c0e Add a new interpolation setting -- "auto" which will choose soxr if supported and the soxr delay is less or equal to the threshold of 30 (milliseconds). 2019-04-16 16:40:56 +01:00
Mike Brady 16235071ee Default to "basic" stuffing even if soxr support is included. 2019-04-15 11:13:51 +01:00
Mike Brady 986f2fb4bd hook up the alsa "use_precision_timing" option and update the sample conf file. 2019-04-09 11:06:52 +01:00
Mike Brady 6d088ac4d9 reinstate the development branch README.md, stop including libdaemon automatically, improve some erro messages concerning -k / -d options. 2019-04-05 16:21:58 +01:00
Mike Brady 178af21dab Make soxr, metadata and apple_alac defaults if support for them is included in the build configuration. 2019-03-08 21:19:48 +00:00
Mike Brady 89340f20c9 3.3 release candidate 0 2019-03-04 12:38:20 +00:00
Mike Brady 182c0a31a4 set default for disable standby to 'never' 2019-02-28 21:53:07 +00:00
Mike Brady d2e1910fba set active state timeout to 10 seconds. Enough for a YouTube movie switch -- 3 or 5 seconds doesn't seem to be enough. 2019-02-28 17:33:51 +00:00
Mike Brady a98a7906de set active state timeout to 3 seconds. Enough for a YouTube movie switch. 2019-02-28 15:05:32 +00:00
Mike Brady 41b584bd43 bring the active state timeout to 1 second and tidy up a few debug messages. 2019-02-28 14:48:41 +00:00
Mike Brady 623b9b4b9f Add a CYGWIN installer. 2019-02-21 16:10:30 +00:00
Mike BradyandGitHub ec84f0fd98 Merge pull request #809 from nettings/development 
Modify audio_jack.c to use native jack lockless buffers and to offer auto connect facilities. Overall, the backend is now written more in the idiom of jack audio.

Many thanks to [Jörn Nettingsmeier](https://github.com/nettings).
 2019-02-19 11:12:03 +00:00
Mike Brady 00be8bc2a6 fix the ability to give attenation priority to hardware or software, set the default to software 2019-02-17 14:10:45 +00:00
Jörn Nettingsmeier 97370d8bce Actually implement auto-connection, and document it. 2019-02-16 18:45:51 +00:00