 Mike Brady
|
a74261bbd3
|
Add a D-Bus property "DisableStandby" to turn standby oo or off.
|
2019-01-11 14:48:00 +00:00 |
|
|
Mike Brady
|
b9d78c8af6
|
Avoid wrapping back to the first three UDP ports when assigning ports using nextFreeUDPPort because the call resetFreeUDPPorts, called when not interrupting an existing session, will assign the first three ports without checking (or knowing) if they were recently in use.
|
2019-01-11 10:42:17 +00:00 |
|
|
Mike Brady
|
2ca6e42b62
|
Do not add dither if at full volume or ignoring volume control
|
2019-01-10 17:00:10 +00:00 |
|
|
Mike Brady
|
fbd8377519
|
Always add dither if no hardware mixer and volume control is not ignored.
|
2019-01-10 16:57:40 +00:00 |
|
|
Mike Brady
|
8f20e5808b
|
clang format
|
2019-01-10 16:12:57 +00:00 |
|
|
Mike Brady
|
1c40176468
|
CLean up timings, clean up DACP interface network timings and error behaviours.
|
2019-01-10 16:11:56 +00:00 |
|
|
Mike Brady
|
8e72574a57
|
Add some diagnostics, shorten timeouts and set so_linger of zero whenever a write or read error occurs.
|
2019-01-10 16:10:53 +00:00 |
|
|
Mike Brady
|
9f8b8a25c9
|
add actual waiting time for a failing timed mutex.
|
2019-01-10 16:09:52 +00:00 |
|
|
Mike Brady
|
c958d506b1
|
reduce thresholds towards a buffer time of 0.2 seconds rather than the 0.25 seconds before.
|
2019-01-09 14:15:05 +00:00 |
|
|
Mike Brady
|
2a9d46afed
|
backend silence threshold should be 0.060 not 0.6!
|
2019-01-09 10:10:04 +00:00 |
|
|
Mike Brady
|
34d6d89707
|
Don't use full flush to purge frames after an overrun -- flush will reset the buffers as well. Fix a potential bug if a flush actually occurs.
|
2019-01-09 10:09:29 +00:00 |
|
|
Mike Brady
|
e9623faa44
|
Go for a 0.250 second buffer length.
|
2019-01-08 17:28:38 +00:00 |
|
|
Mike Brady
|
56f4b124bd
|
Adjust thresholds and timings to suit pi zero.
|
2019-01-08 13:06:46 +00:00 |
|
|
Mike Brady
|
2e3be271fd
|
Preflight all audio material playing (not lead-in silences though...)
|
2019-01-08 13:01:22 +00:00 |
|
|
Mike Brady
|
c3668b3fc0
|
INcrease the delay between reading chunks of the RTSP message, may it less likely to overwhelm the CPU.
|
2019-01-08 13:00:00 +00:00 |
|
|
Mike Brady
|
1b3d64ce85
|
Quieten a debug message.
|
2019-01-08 12:59:04 +00:00 |
|
|
Mike Brady
|
caf06c5aba
|
Add the idea of a preflight message to tell the backend that frames will be coming...
|
2019-01-07 17:34:50 +00:00 |
|
|
Mike Brady
|
4613ee6bcb
|
Make buffer size threashold 100 ms instead of 50 ms. Remove some surplus snd_pcm_prepare calls.
|
2019-01-07 16:00:58 +00:00 |
|
|
Mike Brady
|
67a19bf3c9
|
Make the wait time less than the packet interval time to enable SPS to catch up if it gets behind.
|
2019-01-07 15:59:58 +00:00 |
|
|
Mike Brady
|
0e37f7e78d
|
Only look for snd_pcm_status_get_driver_htstamp is alsa version 1.1 or later...
|
2019-01-04 21:52:36 +00:00 |
|
|
Mike Brady
|
6b42abab72
|
Use driver htstamp rather than regular one. Use untimed_delay so that a regualr delay sets the standoff timer for silence.
|
2019-01-04 20:57:18 +00:00 |
|
|
Mike Brady
|
48043a81cc
|
Move stall threshold calculation to init from start, duh.
|
2019-01-04 18:17:30 +00:00 |
|
|
Mike Brady
|
43a2813b8c
|
Extensive changes to alsa delay() and play() -- recover from XRUN _after_ sending frames; doesn't work otherwise. Update soxr buffer threshold code. Improve missing libsoxr message. Fix syntax of progress metadata. Stop dropping YouTube metadata -- the indication it was invalid is unsafe.
|
2019-01-04 17:30:56 +00:00 |
|
|
Mike Brady
|
80f15e1f57
|
clang format
|
2019-01-04 17:26:55 +00:00 |
|
|
Mike Brady
|
9552b278b7
|
remove some debugging code from delay().
|
2019-01-04 17:26:00 +00:00 |
|
|
Mike Brady
|
7496364aaa
|
continue to change delay() and play() to reflect use of snd_pcm_recover _after_ a XRUN has occurred -- fix rate calculations etc.
|
2019-01-04 17:20:15 +00:00 |
|
|
Mike Brady
|
3434761517
|
Add code for calculating and recognising the interpolation threshold.
|
2019-01-04 17:10:57 +00:00 |
|
|
Mike Brady
|
7b97ea4019
|
Add code for calculating and recognising the interpolation threshold.
|
2019-01-04 17:10:26 +00:00 |
|
|
Mike Brady
|
01dbf625fe
|
Add the interpolation threshold setting.
|
2019-01-04 17:09:37 +00:00 |
|
|
Mike Brady
|
db0e718c12
|
Add code for getting and setting the interpolation threshold.
|
2019-01-04 17:07:21 +00:00 |
|
|
Mike Brady
|
5e38fcd50f
|
Add default values for the interpolation threshold
|
2019-01-04 17:06:21 +00:00 |
|
|
Mike Brady
|
459dd51a31
|
Use snd_pcm_recover only _after_ an XRUN or suspend has happened. Don't use it to remove one -- it doesn't work.
|
2019-01-04 13:50:14 +00:00 |
|
|
Mike Brady
|
4610d0870d
|
Raise the soxr minimum buffer size to something sensible and multiply it by the output ratio
|
2019-01-04 13:48:56 +00:00 |
|
|
Mike Brady
|
4f9730e3b2
|
Give a nice message if the soxr library isn't installed.
|
2019-01-04 13:47:44 +00:00 |
|
|
Mike Brady
|
8e5733e6ae
|
Check before using snd_pcm_prepare in delay()
|
2019-01-04 11:29:18 +00:00 |
|
|
Mike Brady
|
c35fb69e33
|
Fix parsing error with progress 'prgr' metadata
|
2019-01-03 10:48:54 +00:00 |
|
|
Mike Brady
|
f5707d4f18
|
Stop dropping metadata with a zero id -- it's not infallible way of determining if the metadata is invalid.
|
2019-01-03 10:48:09 +00:00 |
|
|
Mike Brady
|
41c8c8b9a1
|
Strengthen the ability to recover from an XRUN by putting in a call to snd_pcm_prepare first.
|
2019-01-03 10:19:44 +00:00 |
|
|
Mike Brady
|
b973619d66
|
Using new delay() and play() functions.
|
2019-01-02 22:42:48 +00:00 |
|
|
Mike Brady
|
15729ebcd4
|
Fix trivial error in a debug message.
|
2019-01-02 22:40:48 +00:00 |
|
|
Mike Brady
|
8d8b8c05f6
|
new play(), delay(), delay_prep_and_status() routines in place and working, but with the old stuff taken out.
|
2019-01-02 19:54:12 +00:00 |
|
|
Mike Brady
|
59d26918f6
|
new play(), delay(), delay_prep_and_status() routines in place and working, but with the old stuff still around.
|
2019-01-02 19:49:15 +00:00 |
|
|
Mike Brady
|
6f8b35d121
|
Try out a new alsa delay routine. Could be very buggy!
|
2019-01-02 14:43:25 +00:00 |
|
|
Mike Brady
|
b4505593b2
|
If output is stalled, don't write any more frames to the output device.
|
2018-12-31 17:46:31 +00:00 |
|
|
Mike Brady
|
fe857037de
|
If output is stalled, don't write any more frames to the output device.
|
2018-12-31 17:46:05 +00:00 |
|
|
Mike Brady
|
fc08572631
|
Modify my_snd_pcm_delay but don't test it yet!
|
2018-12-29 09:34:10 +00:00 |
|
|
Mike Brady
|
919c5fe8b8
|
Add some diagnostics around the state of the DAC during delays.
|
2018-12-28 10:35:13 +00:00 |
|
|
Mike Brady
|
59b3abd965
|
quieten some dacp debug messages
|
2018-12-27 14:36:29 +00:00 |
|
|
Mike Brady
|
fbb381133e
|
Fix some memory leaks, improve silence filling backoff time calculation, alwasy add a NUL to an RTSP message.
|
2018-12-27 14:05:48 +00:00 |
|
|
Mike Brady
|
ad6c721d5a
|
Format
|
2018-12-27 14:04:31 +00:00 |
|