Mike Brady
|
4046c0e73d
|
Fix dither, add dither to silences during lead-in, interpolatied frames and keeping out of standby, only if the output device doesn't use a mixer. Check configuration at initialisation.
|
2018-12-14 15:07:00 +00:00 |
|
Mike Brady
|
7cc434e989
|
Experimentally, add the ability to prevent the DAC making popping noises by feeding it with silence instead of allowing it to stop.
|
2018-12-13 14:47:52 +00:00 |
|
Mike Brady
|
e454572dc7
|
Further debug tidy-ups and update the configuration file.
|
2018-12-11 11:26:39 +00:00 |
|
Mike Brady
|
45ce909214
|
Tidy up some debug messages and warnings, remove old diagnostic codes and settings.
|
2018-12-11 10:56:36 +00:00 |
|
Mike Brady
|
9d5ff22f2d
|
Connect up the stall response to the external command calling -- add a single argument to the unfixable error call.
|
2018-12-10 22:28:52 +00:00 |
|
Mike Brady
|
e5452e5172
|
Make the idle timeout on the RTSP link the same as the overall timeout -- 30 seconds is a bit short. Add checks to the alsa interface timing -- 15 ms to write a packet of frames, 1 ms to ask for the delay.
|
2018-12-08 14:12:33 +00:00 |
|
Mike Brady
|
277d401d24
|
Ensure watchdog always starts with the starting time of the thread. Add watchdog bark count. On the third bark, execute an unfixable error script if present.
|
2018-12-04 17:25:15 +00:00 |
|
Mike Brady
|
67d2a4b5d9
|
Add a 30 second timout on the read function on an RTSP thread.
|
2018-12-03 18:42:49 +00:00 |
|
Mike Brady
|
60315b63c9
|
Try to ensure that any alsa command sequences are uncancellable. Leave a little time afterwards where possible.
|
2018-12-03 17:00:12 +00:00 |
|
Mike Brady
|
8c9b159011
|
Stop using an unsigned integer for time when we want to watch if it goes negative. Only release the playing_conn if we already own it!
|
2018-12-02 18:13:20 +00:00 |
|
Mike Brady
|
2737222b0b
|
Fix a non-initialisation of parameters if no h/w mixer used. Add a few diagnostics, tidy up initial diagnostic message, add verbosity level and whether mixer used.
|
2018-12-01 16:52:23 +00:00 |
|
Mike Brady
|
a5c65ceced
|
Move UDP port cloure to the RTSP thread, don't allow calls to mdns_* to be cancelled. Remove usage of (p)select in rtsp thread handling.
|
2018-11-30 14:55:04 +00:00 |
|
Mike Brady
|
f2a3ba00cc
|
Move cleanup push to start of RTSP initialisation. Take more care at startup and closedown to make stuff uncancellable.
|
2018-11-29 17:14:40 +00:00 |
|
Mike Brady
|
1240c6efab
|
Adds checks for posession of the player in order to handle flush, teardown requests.
|
2018-11-29 15:32:06 +00:00 |
|
Mike Brady
|
fdd5ce430d
|
Check in SETUP and RECORD that the player is available, clean up setup code by removing gotos.
|
2018-11-29 13:13:51 +00:00 |
|
Mike Brady
|
ca45d2ecbe
|
Clang formatted.
|
2018-11-29 12:18:07 +00:00 |
|
Mike Brady
|
c318796e55
|
Add an uncancellable usleep timer. Make the player and UDP thread cleanups uncancellable.
|
2018-11-29 11:37:56 +00:00 |
|
Mike Brady
|
22f3e3e318
|
Move watchdog to cover connection from start, not just from start of play. Start investigating UDP port allocation. Tidy up handling or RTSP write errors -- remove the pselect code from before a write.
|
2018-11-28 17:18:03 +00:00 |
|
Mike Brady
|
4ab81ce0b7
|
Add extra diagnostic to capture a meg_write_response error.
|
2018-11-27 22:53:27 +00:00 |
|
Mike Brady
|
227c38a89c
|
Try to capture what happens after a write error.
|
2018-11-27 22:03:56 +00:00 |
|
Mike Brady
|
998e7cea2c
|
clang-format
|
2018-11-24 11:16:57 +00:00 |
|
Mike Brady
|
a932298d3a
|
Small correction to port selection logic. If a new sesion waits for an existing session to close that it hasn't interrupted, reset the ports base. Quieten some debug messages.
|
2018-11-24 11:06:20 +00:00 |
|
Mike Brady
|
d93aeec50a
|
Quieten a few debug messages.
|
2018-11-23 15:11:04 +00:00 |
|
Mike Brady
|
ae1453f8aa
|
Stop going to verbosity level 3 on occasion. It's not so useful now.
|
2018-11-23 13:57:34 +00:00 |
|
Mike Brady
|
093bf1dd46
|
Rotate usage of UDP ports if a session is interrupted. Avoids out-of-date packets landing in a new session.
|
2018-11-23 13:29:09 +00:00 |
|
Mike Brady
|
3709ac8180
|
experimental
|
2018-11-23 08:53:27 +00:00 |
|
Mike Brady
|
303a85c3b5
|
Add back in the ability to interrupt a session. Clean up a few debug messages.
|
2018-11-21 21:32:18 +00:00 |
|
Mike Brady
|
36e13535e9
|
Forgot!
Merge branch 'development' of https://github.com/mikebrady/shairport-sync into development
|
2018-11-20 23:49:46 +00:00 |
|
Mike Brady
|
0529a58179
|
Wait properly when a session is being interrupted.
|
2018-11-20 23:49:22 +00:00 |
|
Mike Brady
|
ccc4fe09af
|
Tidy up the formats.
|
2018-11-20 22:56:53 +00:00 |
|
Mike Brady
|
6e6c8213e6
|
Put in a cancellation point explicitly in the player_thread main loop. Tidy up some debug messages.
|
2018-11-20 14:18:33 +00:00 |
|
Mike Brady
|
d4435e2068
|
Try to make the debug stuff pthread_cancel-proof including the debug / warn / inform / die and debug_mutex calls. Tidy up usage of program_stop.
|
2018-11-19 18:26:03 +00:00 |
|
Mike Brady
|
58a66ebb0e
|
Make debuglev volatile, over player_vol past the cleanup push, add some temporary diagnostics.
|
2018-11-19 14:24:24 +00:00 |
|
Mike Brady
|
d3ff806412
|
Put a timeout on the rtsp writeback call.
|
2018-11-16 10:05:37 +00:00 |
|
Mike Brady
|
ca3c05f8b5
|
Fix silly issue with diagnostic code.
|
2018-11-14 17:31:39 +00:00 |
|
Mike Brady
|
99374ac113
|
Add a little diagnostic to see what's in the POST message.:
|
2018-11-14 17:21:30 +00:00 |
|
Mike Brady
|
67083665ad
|
Get more diagnostic messages when a TuneBlade-induced error occurs.
|
2018-11-13 11:00:05 +00:00 |
|
Mike Brady
|
501e349466
|
Add better error handling if a reply header message is faulty.
|
2018-11-12 16:41:29 +00:00 |
|
Mike Brady
|
2f1f259d03
|
Use "/dev/urandom" instead of "/dev/random" to generate a nonce for AirPlay passwords.
|
2018-11-03 12:46:17 +00:00 |
|
Mike Brady
|
e0a4e5cde8
|
Format tidy-up
|
2018-10-21 17:10:23 +01:00 |
|
Mike Brady
|
e5259e8764
|
Remove a few compiler warnings.
|
2018-10-21 17:00:56 +01:00 |
|
Mike Brady
|
c9b3d2a2f4
|
Many changes to compilation and linking flags. Stop using HAVE_* flags except where necessary, use CONFIG_* for optional stuff, use HAS_* for immediate definitions, use USE_* for AM definitions. Probably introduced bgs, sigh.
|
2018-09-09 20:41:31 +01:00 |
|
Mike Brady
|
69642bb7de
|
Partly clean up use of automake, autoconfig and compiler flags. Works but still not consistent.
|
2018-09-09 14:12:20 +01:00 |
|
Mike Brady
|
76c5dd9285
|
Stop using SIGUSR1 for cancelling threads, use pthread_cancel and friends instead, fix some memory leaks, add accurate ouput rate calculation to statistics, add "quit" verb to MPRIS and native d-bus interfaces. Probably still buggy.
|
2018-07-30 10:07:11 +01:00 |
|
Mike Brady
|
577449dffa
|
Remove use of SIGUSR1 and pthread_kill to stop threads. Not debugged!
|
2018-07-27 10:58:36 +01:00 |
|
Mike Brady
|
a30c254bb6
|
Quieten some debug messages.
|
2018-07-23 14:26:48 +01:00 |
|
Mike Brady
|
dc4e577d8f
|
Improve some debug messages.
|
2018-07-23 13:56:54 +01:00 |
|
Mike Brady
|
865c71b1d0
|
Remove an unwanted debug messages
|
2018-07-22 16:29:36 +01:00 |
|
Mike Brady
|
2eaaa9cdb3
|
Fix a bug where the dacp notification handlers are called
|
2018-07-21 15:35:07 +01:00 |
|
Mike Brady
|
f1d4503431
|
Try to add proper cancellation code to all threads -- not complete, buggy.
|
2018-07-20 13:50:38 +01:00 |
|