nils/shairport-sync
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update RELEASENOTES.md

Browse Source
This commit is contained in:
Mike Brady
2017-02-22 20:47:53 +00:00
committed by GitHub
parent 3a4c9d00d6
commit f4ed073cdd
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
RELEASENOTES.md
+2 -2
View File
@@ -10,10 +10,10 @@ The most obvious audible change is if you are using software volume control and
Here is the list of new features:
**New Features**
* 8-bit, 16-bit, 24-bit, 24-bit three-byte (S24_3LE and S24_3BE) and 32-bit output to ALSA devices. This will give audibly better results if you are using software volume control on a 24- or 32-bit-capable DAC. (Other back ends are not updated yet.)
* 8-bit, 16-bit, 24-bit, 24-bit three-byte (S24_3LE and S24_3BE) and 32-bit output to ALSA devices.
* 44,100, 88,200, 176,400 and 352,800 sample per second output. This is done using simple upsampling. It's only worth doing if 44,100 samples per second output is not available.
* Internal processing including software volume control and interpolation is done after sample size and rate conversion.
* Apple ALAC decoder support. This needs the `libalac` library, available at [ALAC](https://github.com/mikebrady/alac). Add the flag `--with-apple-alac` to the `./configure` arguments. Then you can choose the Apple ALAC decoder in the configuration file. There is no obvious audible difference between this and the original decoder by David Hammerton.
* Apple ALAC decoder support. This needs the `libalac` library, available at [ALAC](https://github.com/mikebrady/alac), to be installed. Add the flag `--with-apple-alac` to the `./configure` arguments. Then you can choose the Apple ALAC decoder in the configuration file.
* Support for `mbed TLS` has been added and the use of `PolarSSL` is deprecated, as `mbed TLS` is a development of `PolarSSL` and `PolarSSL` itself is not being developed further.
* Choose Network Interface. Add a new setting, for advanced users only, in the `general` section. Use the `interface` setting to allow you to specify the interface on which to provide the AirPlay service. Omit the setting to get the default, which is to choose the interfaces automatically.
* Set Max Volume. Add a new setting, for advanced users only, in the `general` section. Use the `volume_max_db` setting to allow you to specify the maximum level to set on the hardware mixer (if chosen) or the built-in software mixer otherwise. The software mixer's range is 0.0 dB to -96.1 dB. The setting must be a number with a decimal point, e.g. 21.3.