nils/shairport-sync
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update BUILDFORAP2.md

Browse Source
This commit is contained in:
Mike Brady
2021-07-07 15:33:17 +01:00
committed by GitHub
parent b3f32feccb
commit dca7b9c6e3
1 changed files with 6 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files
BUILDFORAP2.md
+6 -6
View File
@@ -67,20 +67,20 @@ Download, install and start/enable `nqptp` from [here](https://github.com/mikebr
The `nqptp` service monitors PTP clocks. It provides a POSIX Shared Memory Interface (SMI) at `/nqptp`. A shared
pthread mutex is contained within the interface, and to use it you need write access.
Next, download Shairport Sync, configure it, compile and install it:
Next, download Shairport Sync, check out the `development` branch, configure it, compile and install it:
```
$ git clone git@github.com:aillwee/shairport-sync.git
$ cd shairport-sync
$ git checkout development
$ git submodule init
$ git submodule update
$ autoreconf -fi
$ CFLAGS="-O0 -g" CXXFLAGS="-O0 -g" ./configure --sysconfdir=/etc --with-metadata \
--with-alsa --with-soxr --with-avahi --with-ssl=openssl --with-systemd --with-dbus-interface --with-airplay-2
$ ./configure --sysconfdir=/etc --with-alsa \
--with-soxr --with-avahi --with-ssl=openssl --with-systemd --with-dbus-interface --with-airplay-2
$ make -j
# make install
```
Now to configure Shairport Sync. Here, it will be configured for an `alsa` output device. A list of `alsa` output devices is given at the end of the help information. Thus, at the end of the output after the command `$ shairport-sync -h` on a Raspberry Pi, for example, the following appears:
By the way, the `autoreconf` step may take quite a while -- be patient!
Now to configure Shairport Sync. In this walkthrough, it will be configured for an `alsa` output device. A list of `alsa` output devices is given at the end of the help information. For example, on a Raspberry Pi, at the end of the output from the command `$ shairport-sync -h`, the following appears:
```
...