nils/shairport-sync
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Fix a few typos in the comments

Browse Source
This commit is contained in:
Mike Brady
2016-09-27 16:24:41 +01:00
parent c6fc233476
commit 0542f5d204
1 changed files with 9 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files
scripts/shairport-sync.conf
+9 -8
View File
@@ -4,12 +4,13 @@
// General Settings
general =
{
// name = "Shairport Sync on %H"; // This is the name the service will advertise to iTunes.
// The default is "<Hostname>" -- the first letter is capitalised (ASCII only.)
// You can use %h for the hostname,
// name = "%H"; // This means "Hostname" -- see below. This is the name the service will advertise to iTunes.
// The default is "Hostname" -- i.e. the machine's hostname with the first letter capitalised (ASCII only.)
// You can use the following substitutions:
// %h for the hostname,
// %H for the Hostname (i.e. with first letter capitalised (ASCII only)),
// %v for the version number, e.g. 3.2.1 and
// %V for the full version string, e.g. 3.2.1-OpenSSL-Avahi-ALSA-soxr-metadata
// %v for the version number, e.g. 2.8.5 and
// %V for the full version string, e.g. 2.8.5-OpenSSL-Avahi-ALSA-soxr-metadata-sysconfdir:/etc
// Overall length can not exceed 50 characters. Example: "Shairport Sync %v on %H".
// password = "secret"; // leave this commented out if you don't want to require a password
// interpolation = "basic"; // aka "stuffing". Default is "basic", alternative is "soxr". Use "soxr" only if you have a reasonably fast processor.
@@ -33,7 +34,7 @@ general =
// How to deal with metadata, including artwork
metadata =
{
// enabled = "no"; // et to yes to get Shairport Sync to solicit metadata from the source and to pass it on via a pipe
// enabled = "no"; // set this to yes to get Shairport Sync to solicit metadata from the source and to pass it on via a pipe
// include_cover_art = "no"; // set to "yes" to get Shairport Sync to solicit cover art from the source and pass it via the pipe. You must also set "enabled" to "yes".
// pipe_name = "/tmp/shairport-sync-metadata";
// pipe_timeout = 5000; // wait for this number of milliseconds for a blocked pipe to unblock before giving up
@@ -60,8 +61,8 @@ alsa =
// output_device = "default"; // the name of the alsa output device. Use "alsamixer" or "aplay" to find out the names of devices, mixers, etc.
// mixer_control_name = "PCM"; // the name of the mixer to use to adjust output volume. If not specified, volume in adjusted in software.
// mixer_device = "default"; // the mixer_device default is whatever the output_device is. Normally you wouldn't have to use this.
// output_rate = 44100; // can be 44100, 88200, 176400, 352800, but the device must be capable of it
// output_format = "S16"; // can be "U8", "S8", "S16", "S24" or "S32", with be LE or BE depending on the processor, but the device must be capable of it
// output_rate = 44100; // can be 44100, 88200, 176400 or 352800, but the device must have the capability.
// output_format = "S16"; // can be "U8", "S8", "S16", "S24" or "S32", but the device must have the capability. Endianness matches that of the processor.
// audio_backend_latency_offset_in_seconds = 0.0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -0.1.
// audio_backend_buffer_desired_length_in_seconds = 0.15; // If set too small, buffer underflow occurs on low-powered machines. Too long and the response times with software mixer become annoying.
// disable_synchronization = "no"; // Set to "yes" to disable synchronization. Default is "no".