ebusd - README -------------- The ebusd provides a communication interface to the energy bus (ebus) which is used in various heating systems. Features -------- * send and receive ebus commands for all ebus message types (message types are: Broadcast, Master-Master and Master-Slave) * collect data of cycle messages * poll messages and collect received data * write raw data into dump files (for debugging purpose) * available daemon commands: - get fetch data from ebus participant - set adjust data of ebus participant - cyc fetch data from collected cycle messages - hex send given hex value to ebus (ZZPBSBNNDx) - log areas change log areas - log level change log level - raw toggle raw data logging - dump toggle raw data dumping - reload reload ebus configuration - stop stop daemon - quit close connection - help print help page Dependency ---------- * glibc Build ----- $ ./autogen.sh [--prefix=/usr] $ make $ make install Daemon Configuration -------------------- See ./ebusd -h Vendor specific configuration files ----------------------------------- See https://github.com/yuhu-/ebus-configuration Tools ----- ebusctl - client program for ebusd. local commands: * 'feed' ebusd with raw data from dump files (or telnet) to ebusd * 'scan' ebus and identifies the participants remote commands: * connect to ebusd (socket) and execute server commands (see above) See ./ebusctl -h For usage and further information take a look on help page. The author can be contacted at ebusd@liwest.at.