83 lines
5.6 KiB
Plaintext
83 lines
5.6 KiB
Plaintext
// Sample Configuration File for Shairport Sync
|
|
// Commented out settings are generally the defaults, except where noted.
|
|
|
|
// General Settings
|
|
general =
|
|
{
|
|
// name = "Shairport Sync Player"; // This is the name the service will advertise to iTunes. The default is "Shairport Sync on <hostname>"
|
|
// password = "secret"; // comment out this line if you want to have no password
|
|
// interpolation = "basic"; // aka "stuffing". Default is "basic", alternative is "soxr". Use "soxr" only if you have a reasonably fast processor.
|
|
// output_backend = "alsa"; // Run "shairport-sync -h" to get a list of all output_backends, e.g. "alsa", "pipe", "stdout". The default is the first one.
|
|
// mdns_backend = "avahi"; // Run "shairport-sync -h" to get a list of all mdns_backends. The default is the first one.
|
|
// port = 5000; // Listen for service requests on this port
|
|
// udp_port_base = 6001; // start allocating UDP ports from this port number when needed
|
|
// udp_port_range = 100; // look for free ports in this number of places, starting at the UDP port base (only three are needed).
|
|
// statistics = "no"; // set to "yes" to print statistics in the log
|
|
// drift = 88; // allow this number of frames of drift away from exact synchronisation before attempting to correct it
|
|
// resync_threshold = 2205; // a synchronisation error greater than this will cause resynchronisation; 0 disables it
|
|
// log_verbosity = 0; // "0" means no debug verbosity, "3" is most verbose.
|
|
// ignore_volume_control = "no"; // set this to "yes" if you want the volume to be at 100% no matter what the source's volume control is set to.
|
|
// volume_range_db = 60 ; // use this to set the range, in dB, you want between the maximum volume and the minimum volume. Range is 30 to 150 dB. Omit to use mixer's native range.
|
|
};
|
|
|
|
// How to deal with metadata, including artwork
|
|
metadata =
|
|
{
|
|
// enabled = "no"; // et to yes to get Shairport Sync to solicit metadata from the source and to pass it on via a pipe
|
|
// include_cover_art = "no"; // set to "yes" to get Shairport Sync to solicit cover art from the source and pass it via the pipe. You must also set "enabled" to "yes".
|
|
// pipe_name = "/tmp/shairport-sync-metadata";
|
|
};
|
|
|
|
// Advanced parameters for controlling how a Shairport Sync runs
|
|
sessioncontrol =
|
|
{
|
|
// run_this_before_play_begins = "/full/path/to/application and args"; // make sure the application has executable permission. It it's a script, include the #!... stuff on the first line
|
|
// run_this_after_play_ends = "/full/path/to/application and args"; // make sure the application has executable permission. It it's a script, include the #!... stuff on the first line
|
|
// wait_for_completion = "no"; // set to "yes" to get Shairport Sync to wait until the "run_this..." applications have terminated before continuing
|
|
// allow_session_interruption = "no"; // set to "yes" to allow another device to interrupt Shairport Sync while it's playing from an existing audio source
|
|
// session_timeout = 120; // wait for this number of seconds after a source disappears before terminating the session and becoming available again.
|
|
};
|
|
|
|
//
|
|
// Back End Settings
|
|
//
|
|
|
|
// These are parameters for the "alsa" audio back end, the only back end that supports synchronised audio.
|
|
alsa =
|
|
{
|
|
// output_device = "default"; // the name of the alsa output device. Use "alsamixer" or "aplay" to find out the names of devices, mixers, etc.
|
|
// mixer_control_name = "PCM"; // the name of the mixer to use to adjust output volume. If not specified, volume in adjusted in software.
|
|
// mixer_device = "default"; // the mixer_device default is whatever the output_device is. Normally you wouldn't have to use this.
|
|
// audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
|
|
// audio_backend_buffer_desired_length = 6615; // If set too small, buffer underflow occurs on low-powered machines. Too long and the response times with software mixer become annoying.
|
|
};
|
|
|
|
// These are parameters for the "pipe" audio back end, a back end that directs raw CD-style audio output to a pipe. No interpolation is done.
|
|
pipe =
|
|
{
|
|
// name = "/path/to/pipe"; // there is no default pipe name for the output
|
|
// audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
|
|
// audio_backend_buffer_desired_length = 44100; // Having started to send audio at the right time, send all subsequent audio this many frames ahead of time, creating a buffer this size.
|
|
};
|
|
|
|
// These are parameters for the "stdout" audio back end, a back end that directs raw CD-style audio output to stdout. No interpolation is done.
|
|
stdout =
|
|
{
|
|
// audio_backend_latency_offset = 0; // Set this offset to compensate for a fixed delay in the audio back end. E.g. if the output device delays by 100 ms, set this to -4410.
|
|
// audio_backend_buffer_desired_length = 44100; // Having started to send audio at the right time, send all subsequent audio this many frames ahead of time, creating a buffer this size.
|
|
};
|
|
|
|
// The following static latency settings are deprecated -- do not use them for new installations. Shairport Sync now sets latencies automatically.
|
|
// To compensate for a delay in the output device using the alsa/stdio/pipe "audio_backend_latency_offset" setting.
|
|
|
|
// Static latencies for different sources. These have been estimated from listening tests.
|
|
latencies =
|
|
{
|
|
// default = 88200; // used for unrecognised sources and for iTunes up to and including iTunes 9.X.
|
|
// itunes = 99400; // used for iTunes 10 or later
|
|
// airplay = 88200;
|
|
// forkedDaapd = 99400;
|
|
};
|
|
|
|
|