Files
shairport-sync/common.h
T
Mike Brady fd880056fb Squashed commit of the following:
Add three parameters to the backend play() function call -- (1) a flag indicating whether the samples are timed or not. If timed, (2) the timestamp and (3) the local time at which the first frame should be heard.
    Update missing pipewire library message.
    Makefile.am fix.
    Update the SHM version and fix the SHM name so that it works with FreeBSD.
    Remove redundant (?) AC_HEADER_STDC check.
    Fix compilation and installation under FreeBSD -- changes to allow building in a separate directory broke the FreeBSD build process.
    Add AC_CHECK_LIB for gcrypt in case PKG_CHECK_MODULES fails to find it.
    Find gcrypt using pkg-config
    Add code to detect when the RTSP channel goes idle for a period, and use it to reset clocks and timings, etc. so that SPS resumes correctly where the source has gone to sleep while playing a realtime stream and has subsequently woken up.
    Don't exit if a UDP Clock Control packet is empty. Also check minimum packet size.
    Remove some very experimental code which may cause memory and port leaks.
    Strip file path from the filename used in debug messages, information messages, warnings and fatal error messages.
    BB fix to Makefile.am -- overwriting the DBUS stuff with MPRIS definitions, duh.
    Fix some problems building on FreeBSD and tidy up the use of the "sed" editor.
    Fix some problems building on picore.
    Fix an uninitialised variable
    start using the "nqptp" SMI
2022-09-12 15:19:52 +01:00

517 lines
20 KiB
C

#ifdef __cplusplus
extern "C" {
#endif
#ifndef _COMMON_H
#define _COMMON_H
#include <libconfig.h>
#include <pthread.h>
#include <signal.h>
#include <stdint.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <unistd.h>
#include "audio.h"
#include "config.h"
#include "definitions.h"
#include "mdns.h"
// struct sockaddr_in6 is bigger than struct sockaddr. derp
#ifdef AF_INET6
#define SOCKADDR struct sockaddr_storage
#define SAFAMILY ss_family
#else
#define SOCKADDR struct sockaddr
#define SAFAMILY sa_family
#endif
#if defined(CONFIG_DBUS_INTERFACE) || defined(CONFIG_MPRIS_INTERFACE)
typedef enum {
DBT_system = 0, // use the session bus
DBT_session, // use the system bus
} dbus_session_type;
#endif
typedef enum {
TOE_normal,
TOE_emergency,
TOE_dbus // a dbus request was made -- don't wait for the dbus thread to exit
} type_of_exit_type;
#define sps_extra_code_output_stalled 32768
#define sps_extra_code_output_state_cannot_make_ready 32769
// yeah/no/auto
typedef enum { YNA_AUTO = -1, YNA_NO = 0, YNA_YES = 1 } yna_type;
// yeah/no/dont-care
typedef enum { YNDK_DONT_KNOW = -1, YNDK_NO = 0, YNDK_YES = 1 } yndk_type;
typedef enum {
SS_LITTLE_ENDIAN = 0,
SS_PDP_ENDIAN,
SS_BIG_ENDIAN,
} endian_type;
typedef enum {
ST_basic = 0, // straight deletion or insertion of a frame in a 352-frame packet
ST_soxr, // use libsoxr to make a 352 frame packet one frame longer or shorter
ST_auto, // use soxr if compiled for it and if the soxr_index is low enough
} stuffing_type;
typedef enum {
ST_stereo = 0,
ST_mono,
ST_reverse_stereo,
ST_left_only,
ST_right_only,
} playback_mode_type;
typedef enum {
VCP_standard = 0,
VCP_flat,
} volume_control_profile_type;
typedef enum {
decoder_hammerton = 0,
decoder_apple_alac,
} decoders_supported_type;
typedef enum {
disable_standby_off = 0,
disable_standby_auto,
disable_standby_always
} disable_standby_mode_type;
// the following enum is for the formats recognised -- currently only S16LE is recognised for input,
// so these are output only for the present
typedef enum {
SPS_FORMAT_UNKNOWN = 0,
SPS_FORMAT_S8,
SPS_FORMAT_U8,
SPS_FORMAT_S16,
SPS_FORMAT_S16_LE,
SPS_FORMAT_S16_BE,
SPS_FORMAT_S24,
SPS_FORMAT_S24_LE,
SPS_FORMAT_S24_BE,
SPS_FORMAT_S24_3LE,
SPS_FORMAT_S24_3BE,
SPS_FORMAT_S32,
SPS_FORMAT_S32_LE,
SPS_FORMAT_S32_BE,
SPS_FORMAT_AUTO,
SPS_FORMAT_INVALID,
} sps_format_t;
const char *sps_format_description_string(sps_format_t format);
typedef struct {
double missing_port_dacp_scan_interval_seconds; // if no DACP port number can be found, check at
// these intervals
double resend_control_first_check_time; // wait this long before asking for a missing packet to be
// resent
double resend_control_check_interval_time; // wait this long between making requests
double resend_control_last_check_time; // if the packet is missing this close to the time of use,
// give up
pthread_mutex_t lock;
config_t *cfg;
int endianness;
double airplay_volume; // stored here for reloading when necessary
char *appName; // normally the app is called shairport-syn, but it may be symlinked
char *password;
char *service_name; // the name for the shairport service, e.g. "Shairport Sync Version %v running
// on host %h"
#ifdef CONFIG_PA
char *pa_server; // the pulseaudio server address that Shairport Sync will play on.
char *pa_application_name; // the name under which Shairport Sync shows up as an "Application" in
// the Sound Preferences in most desktop Linuxes.
// Defaults to "Shairport Sync". Shairport Sync must be playing to see it.
char *pa_sink; // the name (or id) of the sink that Shairport Sync will play on.
#endif
#ifdef CONFIG_METADATA
int metadata_enabled;
char *metadata_pipename;
char *metadata_sockaddr;
int metadata_sockport;
size_t metadata_sockmsglength;
int get_coverart;
#endif
#ifdef CONFIG_MQTT
int mqtt_enabled;
char *mqtt_hostname;
int mqtt_port;
char *mqtt_username;
char *mqtt_password;
char *mqtt_capath;
char *mqtt_cafile;
char *mqtt_certfile;
char *mqtt_keyfile;
char *mqtt_topic;
int mqtt_publish_raw;
int mqtt_publish_parsed;
int mqtt_publish_cover;
int mqtt_enable_remote;
char *mqtt_empty_payload_substitute;
#endif
uint8_t hw_addr[8]; // only needs 6 but 8 is handy when converting this to a number
int port;
int udp_port_base;
int udp_port_range;
int ignore_volume_control;
int volume_max_db_set; // set to 1 if a maximum volume db has been set
int volume_max_db;
int no_sync; // disable synchronisation, even if it's available
int no_mmap; // disable use of mmap-based output, even if it's available
double resyncthreshold; // if it get's out of whack my more than this number of seconds, resync.
// Zero means never
// resync.
int allow_session_interruption;
int timeout; // while in play mode, exit if no packets of audio come in for more than this number
// of seconds . Zero means never exit.
int dont_check_timeout; // this is used to maintain backward compatibility with the old -t option
// behaviour; only set by -t 0, cleared by everything else
char *output_name;
audio_output *output;
char *mdns_name;
mdns_backend *mdns;
int buffer_start_fill;
uint32_t userSuppliedLatency; // overrides all other latencies -- use with caution
uint32_t fixedLatencyOffset; // add this to all automatic latencies supplied to get the actual
// total latency
// the total latency will be limited to the min and max-latency values, if supplied
#ifdef CONFIG_LIBDAEMON
int daemonise;
int daemonise_store_pid; // don't try to save a PID file
char *piddir;
char *computed_piddir; // the actual pid directory to create, if any
char *pidfile;
#endif
int log_fd; // file descriptor of the file or pipe to log stuff to.
char *log_file_path; // path to file or pipe to log to, if any
int logOutputLevel; // log output level
int debugger_show_elapsed_time; // in the debug message, display the time since startup
int debugger_show_relative_time; // in the debug message, display the time since the last one
int debugger_show_file_and_line; // in the debug message, display the filename and line number
int statistics_requested, use_negotiated_latencies;
playback_mode_type playback_mode;
char *cmd_start, *cmd_stop, *cmd_set_volume, *cmd_unfixable;
char *cmd_active_start, *cmd_active_stop;
int cmd_blocking, cmd_start_returns_output;
double tolerance; // allow this much drift before attempting to correct it
stuffing_type packet_stuffing;
int soxr_delay_index;
int soxr_delay_threshold; // the soxr delay must be less or equal to this for soxr interpolation
// to be enabled under the auto setting
int decoders_supported;
int use_apple_decoder; // set to 1 if you want to use the apple decoder instead of the original by
// David Hammerton
// char *logfile;
// char *errfile;
char *configfile;
char *regtype; // The regtype is the service type followed by the protocol, separated by a dot, by
// default “_raop._tcp.” for AirPlay 1.
char *regtype2; // The regtype is the service type followed by the protocol, separated by a dot,
// by default “_raop._tcp.” for AirPlay 2.
char *interface; // a string containg the interface name, or NULL if nothing specified
int interface_index; // only valid if the interface string is non-NULL
double audio_backend_buffer_desired_length; // this will be the length in seconds of the
// audio backend buffer -- the DAC buffer for ALSA
double audio_backend_buffer_interpolation_threshold_in_seconds; // below this, soxr interpolation
// will not occur -- it'll be
// basic interpolation instead.
double disable_standby_mode_silence_threshold; // below this, silence will be added to the output
// buffer
double disable_standby_mode_silence_scan_interval; // check the threshold this often
double audio_backend_latency_offset; // this will be the offset in seconds to compensate for any
// fixed latency there might be in the audio path
int audio_backend_silent_lead_in_time_auto; // true if the lead-in time should be from as soon as
// packets are received
double audio_backend_silent_lead_in_time; // the length of the silence that should precede a play.
uint32_t minimum_free_buffer_headroom; // when effective latency is calculated, ensure this number
// of buffers are unallocated
double active_state_timeout; // the amount of time from when play ends to when the system leaves
// into the "active" mode.
uint32_t volume_range_db; // the range, in dB, from max dB to min dB. Zero means use the mixer's
// native range.
int volume_range_hw_priority; // when extending the volume range by combining sw and hw
// attenuators, lowering the volume, use all the hw attenuation
// before using
// sw attenuation
volume_control_profile_type volume_control_profile;
int output_format_auto_requested; // true if the configuration requests auto configuration
sps_format_t output_format;
int output_rate_auto_requested; // true if the configuration requests auto configuration
unsigned int output_rate;
#ifdef CONFIG_CONVOLUTION
int convolution;
int convolver_valid;
char *convolution_ir_file;
float convolution_gain;
int convolution_max_length;
#endif
int loudness;
float loudness_reference_volume_db;
int alsa_use_hardware_mute;
double alsa_maximum_stall_time;
disable_standby_mode_type disable_standby_mode;
volatile int keep_dac_busy;
yna_type use_precision_timing; // defaults to no
#if defined(CONFIG_DBUS_INTERFACE)
dbus_session_type dbus_service_bus_type;
#endif
#if defined(CONFIG_MPRIS_INTERFACE)
dbus_session_type mpris_service_bus_type;
#endif
#ifdef CONFIG_METADATA_HUB
char *cover_art_cache_dir;
int retain_coverart;
int scan_interval_when_active; // number of seconds between DACP server scans when playing
// something (1)
int scan_interval_when_inactive; // number of seconds between DACP server scans playing nothing
// (3)
int scan_max_bad_response_count; // number of successive bad results to ignore before giving up
// (10)
int scan_max_inactive_count; // number of scans to do before stopping if not made active again
// (about 15 minutes worth)
#endif
int disable_resend_requests; // set this to stop resend request being made for missing packets
double diagnostic_drop_packet_fraction; // pseudo randomly drop this fraction of packets, for
// debugging. Currently audio packets only...
#ifdef CONFIG_JACK
char *jack_client_name;
char *jack_autoconnect_pattern;
#ifdef CONFIG_SOXR
int jack_soxr_resample_quality;
#endif
#endif
void *gradients; // a linked list of the clock gradients discovered for all DACP IDs
// can't use IP numbers as they might be given to different devices
// can't get hold of MAC addresses.
// can't define the nvll linked list struct here
#ifdef CONFIG_AIRPLAY_2
uint64_t airplay_features;
uint32_t airplay_statusflags;
char *airplay_device_id; // for the Bonjour advertisement and the GETINFO PList
char *airplay_pin; // non-NULL, 4 char PIN, if required for pairing
char *airplay_pi; // UUID in the Bonjour advertisement and the GETINFO Plist
char *nqptp_shared_memory_interface_name; // client name for nqptp service
#endif
} shairport_cfg;
// accessors to config for multi-thread access
double get_config_airplay_volume();
void set_config_airplay_volume(double v);
uint32_t nctohl(const uint8_t *p); // read 4 characters from *p and do ntohl on them
uint16_t nctohs(const uint8_t *p); // read 2 characters from *p and do ntohs on them
uint64_t nctoh64(const uint8_t *p); // read 8 characters from *p to a uint64_t
void memory_barrier();
void log_to_stderr(); // call this to direct logging to stderr;
void log_to_stdout(); // call this to direct logging to stdout;
void log_to_syslog(); // call this to direct logging to the system log;
void log_to_file(); // call this to direct logging to a file or (pre-existing) pipe;
// true if Shairport Sync is supposed to be sending output to the output device, false otherwise
int get_requested_connection_state_to_output();
void set_requested_connection_state_to_output(int v);
int try_to_open_pipe_for_writing(
const char *pathname); // open it without blocking if it's not hooked up
/* from
* http://coding.debuntu.org/c-implementing-str_replace-replace-all-occurrences-substring#comment-722
*/
char *str_replace(const char *string, const char *substr, const char *replacement);
// based on http://burtleburtle.net/bob/rand/smallprng.html
void r64init(uint64_t seed);
uint64_t r64u();
int64_t r64i();
// if you are breaking in to a session, you need to avoid the ports of the current session
// if you are law-abiding, then you can reuse the ports.
// so, you can reset the free UDP ports minder when you're legit, and leave it otherwise
// the downside of using different ports each time is that it might make the firewall
// rules a bit more complex, as they need to allow more than the minimum three ports.
// a range of 10 is suggested anyway
void resetFreeUDPPort();
uint16_t nextFreeUDPPort();
extern volatile int debuglev;
void _die(const char *filename, const int linenumber, const char *format, ...);
void _warn(const char *filename, const int linenumber, const char *format, ...);
void _inform(const char *filename, const int linenumber, const char *format, ...);
void _debug(const char *filename, const int linenumber, int level, const char *format, ...);
#define die(...) _die(__FILE__, __LINE__, __VA_ARGS__)
#define debug(...) _debug(__FILE__, __LINE__, __VA_ARGS__)
#define warn(...) _warn(__FILE__, __LINE__, __VA_ARGS__)
#define inform(...) _inform(__FILE__, __LINE__, __VA_ARGS__)
uint8_t *base64_dec(char *input, int *outlen);
char *base64_enc(uint8_t *input, int length);
#define RSA_MODE_AUTH (0)
#define RSA_MODE_KEY (1)
uint8_t *rsa_apply(uint8_t *input, int inlen, int *outlen, int mode);
// given a volume (0 to -30) and high and low attenuations in dB*100 (e.g. 0 to -6000 for 0 to -60
// dB), return an attenuation depending on a linear interpolation along along the range
double flat_vol2attn(double vol, long max_db, long min_db);
// given a volume (0 to -30) and high and low attenuations in dB*100 (e.g. 0 to -6000 for 0 to -60
// dB), return an attenuation depending on the transfer function
double vol2attn(double vol, long max_db, long min_db);
// return a time in nanoseconds
#ifdef COMPILE_FOR_LINUX_AND_FREEBSD_AND_CYGWIN_AND_OPENBSD
// Not defined for macOS
uint64_t get_realtime_in_ns(void);
#endif
uint64_t get_absolute_time_in_ns(void); // monotonic_raw or monotonic
uint64_t get_monotonic_time_in_ns(void); // NTP-disciplined
// time at startup for debugging timing
extern uint64_t ns_time_at_startup, ns_time_at_last_debug_message;
// this is for reading an unsigned 32 bit number, such as an RTP timestamp
uint32_t uatoi(const char *nptr);
// this is for allowing us to cancel the whole program
extern pthread_t main_thread_id;
extern shairport_cfg config;
extern config_t config_file_stuff;
extern int type_of_exit_cleanup; // normal, emergency, dbus requested...
int config_set_lookup_bool(config_t *cfg, char *where, int *dst);
void command_start(void);
void command_stop(void);
void command_execute(const char *command, const char *extra_argument, const int block);
void command_set_volume(double volume);
int mkpath(const char *path, mode_t mode);
void shairport_shutdown();
extern sigset_t pselect_sigset;
extern pthread_mutex_t the_conn_lock;
#define conn_lock(arg) \
pthread_mutex_lock(&the_conn_lock); \
arg; \
pthread_mutex_unlock(&the_conn_lock);
// wait for the specified time in microseconds -- it checks every 20 milliseconds
// int sps_pthread_mutex_timedlock(pthread_mutex_t *mutex, useconds_t dally_time,
// const char *debugmessage, int debuglevel);
// wait for the specified time, checking every 20 milliseconds, and block if it can't acquire the
// lock
int _debug_mutex_lock(pthread_mutex_t *mutex, useconds_t dally_time, const char *mutexName,
const char *filename, const int line, int debuglevel);
#define debug_mutex_lock(mu, t, d) _debug_mutex_lock(mu, t, #mu, __FILE__, __LINE__, d)
int _debug_mutex_unlock(pthread_mutex_t *mutex, const char *mutexName, const char *filename,
const int line, int debuglevel);
#define debug_mutex_unlock(mu, d) _debug_mutex_unlock(mu, #mu, __FILE__, __LINE__, d)
void pthread_cleanup_debug_mutex_unlock(void *arg);
#define pthread_cleanup_debug_mutex_lock(mu, t, d) \
if (_debug_mutex_lock(mu, t, #mu, __FILE__, __LINE__, d) == 0) \
pthread_cleanup_push(pthread_cleanup_debug_mutex_unlock, (void *)mu)
#define config_lock \
if (pthread_mutex_trylock(&config.lock) != 0) { \
debug(1, "config_lock: cannot acquire config.lock"); \
}
#define config_unlock pthread_mutex_unlock(&config.lock)
extern pthread_mutex_t r64_mutex;
#define r64_lock pthread_mutex_lock(&r64_mutex)
#define r64_unlock pthread_mutex_unlock(&r64_mutex)
char *get_version_string(); // mallocs a string space -- remember to free it afterwards
int64_t generate_zero_frames(char *outp, size_t number_of_frames, sps_format_t format,
int with_dither, int64_t random_number_in);
void malloc_cleanup(void *arg);
int string_update_with_size(char **str, int *flag, char *s, size_t len);
// from https://stackoverflow.com/questions/13663617/memdup-function-in-c, with thanks
void *memdup(const void *mem, size_t size);
int bind_socket_and_port(int type, int ip_family, const char *self_ip_address, uint32_t scope_id,
uint16_t *port, int *sock);
uint16_t bind_UDP_port(int ip_family, const char *self_ip_address, uint32_t scope_id, int *sock);
void socket_cleanup(void *arg);
void mutex_unlock(void *arg);
void mutex_cleanup(void *arg);
void cv_cleanup(void *arg);
void thread_cleanup(void *arg);
#ifdef CONFIG_AIRPLAY_2
void plist_cleanup(void *arg);
#endif
char *debug_malloc_hex_cstring(void *packet, size_t nread);
// from https://stackoverflow.com/questions/13663617/memdup-function-in-c, with thanks
// allocates memory and copies the content to it
// analogous to strndup;
void *memdup(const void *mem, size_t size);
// the difference between two unsigned 32-bit modulo values as a signed 32-bit result
// now, if the two numbers are constrained to be within 2^(n-1)-1 of one another,
// we can use their as a signed 2^n bit number which will be positive
// if the first number is the same or "after" the second, and
// negative otherwise
int32_t mod32Difference(uint32_t a, uint32_t b);
int get_device_id(uint8_t *id, int int_length);
#ifdef CONFIG_USE_GIT_VERSION_STRING
extern char git_version_string[];
#endif
#endif // _COMMON_H
#ifdef __cplusplus
}
#endif