Mike Brady
1ca4ebcf02
Make some more error conditions terminate the program.
2021-06-30 10:13:13 +01:00
Mike Brady
f923e99f98
Terminate the program if the specified output device can not be found.
2021-06-30 10:02:46 +01:00
Mike Brady
5c08ccd4d0
Correct the information in a non-available frame rate error message from audio_alsa.c.
2021-06-30 09:49:16 +01:00
Mike Brady
6e24897d4d
Correct the information in a non-available frame rate error message from audio_alsa.c.
2021-06-30 09:46:41 +01:00
Mike Brady
0c7d385f35
Keep an eye on DAC underrun recoveries
2021-06-22 14:09:09 +01:00
Mike Brady
0f1118c142
Exit immediately if the speed or format cannot be set.
2021-06-06 15:48:09 +01:00
Mike Brady
e4c82b7700
Add some comments and a new debug message about underrun
2021-06-04 09:41:15 +01:00
Mike Brady
c5dafbd28b
Remember the original anchor information so that if the master clock become equal to it in the future, it can be restored to those exact numbers and eliminate any intervening approximations. Add some diagnostics.
2021-06-01 14:51:17 +01:00
Mike Brady
7df6ff0a55
Exit if the requested output format is not available.
2021-06-01 09:51:14 +01:00
Mike Brady
d4ea91aa65
Rough and hacky but works with the bit depth of the output DAC to automatically choose the correct AAC decoding sample size. Allocation of rotating buffers is fixed and profligate.
2021-06-01 08:56:47 +01:00
Mike Brady
d2d35cc758
Quieten speed and size debug message
2021-05-10 09:36:14 +01:00
Mike Brady
a68f28ac2b
clang format
2021-05-01 14:09:38 +01:00
Mike Brady
3a02b79a62
Update the mdns stuff to work with a string, update audio_alsa rtp.c, rtsp.c and shairport.c to build and work in AirPlay 1 but with AirPlay 2 code in place. Some of it is #defined out.
2021-04-30 09:29:30 +01:00
Mike Brady
561a129617
Fix a race condition where the alsa_handle could be checked for null but then set to null before use. The code between the check and the use is now protected.
2021-04-08 13:56:13 +01:00
Mike Brady
6a42c76569
Stop using snd_pcm_status_get_driver_htstamp in the alsa precision timing function. It seems to have changed (?).
2021-03-27 16:12:42 +00:00
Mike Brady
fd4c429b5a
Be more careful with changing precision. Stop using snd_pcm_status_get_driver_htstamp.
2021-03-27 15:37:29 +00:00
Mike Brady
54d761ff7d
Clean up some of the wording and layout of the configuration file
...
Clean up and improve the way lead-in sillence is used to give a more accurate sync time to the first packet of audio.
Allow very good sync to occur with 0.3 seconds of lead-in silence.
Improve the use of the buffer offset.
Format some other files.
2020-05-18 16:55:09 +01:00
Mike Brady
67e9b1b6cd
partial move to using a nanosecond-based system timer. More to come.
2020-02-24 19:40:44 +00:00
Mike Brady
f771774519
Compiles under gcc-10 with -fno-common
2020-02-13 17:37:41 +00:00
Mike Brady
aeb46892e0
correct frame size entry for S24 format
2019-11-09 09:35:04 +00:00
Mike Brady
1b4c9b1783
quieten a debug message
2019-09-10 13:10:49 +01:00
Mike Brady
e8a92d3c3b
ensure alsa mixer is initialised before trying to set volume. Normalise the 'pvol' volume mesasages to the hardware devices' maximum volume when using combined hardware and software attenuation.
2019-09-10 13:03:54 +01:00
Chris Boot
b9cf91b2bb
More typo fixes across the tree
...
Previously I have made spelling changes as caught by Debian's lintian
tool, which has a short list of common misspellings that it tests for.
This time I decided to run codespell against the source and fix all the
obvious problems it came up with. It also uses a list of misspellings
but it's much larger than lintian's, but also has some false positives
so I went over the list by hand.
The command I used to do check the source was:
git ls-tree -rz --name-only HEAD | xargs -0 codespell -L minimise,errorstring
2019-07-27 00:05:38 -03:00
Mike Brady
a8faacd3fc
Expose some of the settings used in the disable_standby_mode.
...
Specifically, firstly, the disable_standby_mode_silence_threshold, which is the
amount of audio in the output device's hardware buffer. It should normally
be close to the value givein in the audio_backend_buffer_desired_length_in_seconds
setting. If it drops to this value, silence is added to the buffer to prevent
the output device from becoming idle.
Secondly, the disable_standby_mode_silence_scan_interval is the time between checks
of the output device's hardware buffer.
The code for generating frames of possibly-dithered silence has been simplified.
2019-06-20 10:45:27 +01:00
Mike Brady
c8b0be30b4
find . \( -name \*.cpp -or -name \*.h -or -name \*.c \) -exec clang-format -i -style='{BasedOnStyle: llvm, IndentWidth: 2, ColumnLimit: 100}' '{}' \;
2019-06-19 19:06:54 +01:00
Mike Brady and GitHub
1ca9226242
Update audio_alsa.c
2019-06-17 22:25:47 +01:00
Mike Brady
7013b0cc3d
refine the selection of precision timing to be allowed only if the device is a real hardware device
2019-06-17 19:43:23 +01:00
Mike Brady
9199bf24dd
fix the detection of the availability of precision timing information -- actuall, renable it
2019-06-17 10:38:20 +01:00
Mike Brady
a46c761aa6
make snd_pcm_recover silent when the debug level is 0, not the other way around, duh.
2019-06-17 10:04:23 +01:00
Mike Brady
65abca2562
change the threshold for turning off disable standby mode to more than 40 underruns in the first 100 writes.
2019-06-17 09:47:56 +01:00
Mike Brady
cd9982c43b
if disable_standby_mode is enabled, disable if if more than 20 underruns occur for 50 silence buffers at the start.
2019-06-17 09:39:04 +01:00
Mike Brady
dbea82c212
restore full code for checking for precise timing but stop making it necessary for disable standby mode.
2019-06-17 07:54:04 +01:00
Jörg Krause and GitHub
854942df92
Debug requested period size value
2019-06-04 20:47:43 +02:00
Mike Brady
3ca3408255
Fix error message for invalid standby mode choice
2019-06-04 15:32:10 +01:00
Mike Brady
4bafe1c982
quieten a compilation warning
2019-06-03 10:03:54 +01:00
Mike Brady
76ad4e6a73
enable specification of specific formats and/or speeds to turn off automatic format/speed selection, fixing a bug. Clarify some of the warnings. Fix a few typos in the configuration file sample.
2019-05-29 16:00:47 +01:00
Mike Brady
d9168f4aa7
remove a strncpy truncation warning
...
update a timing setting in the settings file
list the alsa hardware devices in the -h message
2019-05-17 10:43:54 +01:00
Mike Brady
f13f22d857
Fix stupid auto format error.
2019-05-07 12:22:23 +01:00
Mike Brady
83c0405d03
Add automatic bit depth and speed selection for alsa devices. Set rate and format to "auto" by default. Always look for the greatest bit depth, but the lowest multiple of 44,100.
...
Improve support for big-endian CPUs by adding support for explicit -endian formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE.
For the "disable_standby_mode" setting, change "while_active" to "auto".
2019-05-07 10:19:04 +01:00
Mike Brady
1d32976d07
Improve support for bigendian devices. Add support for S16_LE, S16_BE, S24_LE, S24_BE, S32_LE and S32_BE formats. Make the default S16_LE. Allow precision timing only on alsa devices with names beginning with "hw:". Use snd_pcm_hw_params_is_monotonic() to see if clock is monotonic.
2019-05-01 11:01:15 +01:00
Mike Brady
449a9be55e
make Shairport Sync die for some other serious alsa device errors
2019-04-09 22:37:59 +01:00
Mike Brady
84eecaf722
use abort() to exit after a "die" call and fix the logic of opening the alsa device -- success was causing it to die, duh.
2019-04-09 22:26:26 +01:00
Mike Brady
d3072ae827
Give error if alsa output device can't be found.
2019-04-09 11:35:46 +01:00
Mike Brady
986f2fb4bd
hook up the alsa "use_precision_timing" option and update the sample conf file.
2019-04-09 11:06:52 +01:00
Mike Brady
aac57c9cdc
add standard timing -- more compatible -- and precision timing -- more precise. Add option reader but it's not connected up yet.
2019-04-09 10:23:23 +01:00
Mike Brady
5d005e211a
Dirty Hack #11 -- avoid using pcm_get_status
2019-04-08 21:55:18 +01:00
Mike Brady
06e9f370c2
Dirty Hack #10 -- add a snd_pcm_prepare call
2019-04-08 21:45:59 +01:00
Mike Brady
3d73e8153d
Dirty Hack #9
2019-04-08 21:28:56 +01:00
Mike Brady
60c2bf27f6
Dirty Hack #8
2019-04-08 21:14:46 +01:00
Mike Brady
1f45b8c006
allow calculation of nominal source frame rates even when the connection is error prone.
2019-04-02 15:37:38 +01:00
Mike Brady
Mike Brady
Mike Brady
Chris Boot
Jörg KrauseandGitHub