Mike Brady
dfd90bac6b
Clean up code for the silent lead-in on a non-syncing back end e.g. a pipe. Clean up pipe creation and initial opening and associated error messages. Fix error with warning/die messages. Tidy up some debug messages.
2020-06-05 17:22:53 +01:00
Mike Brady
54d761ff7d
Clean up some of the wording and layout of the configuration file
...
Clean up and improve the way lead-in sillence is used to give a more accurate sync time to the first packet of audio.
Allow very good sync to occur with 0.3 seconds of lead-in silence.
Improve the use of the buffer offset.
Format some other files.
2020-05-18 16:55:09 +01:00
Mike Brady
789ba1ee5e
Treat the "mper" attribute as the 64-bit item that it is rather than a 32-bit item as hithereto. Output it as a hexadecimal number to correspond with the format of the track id obtained from AppleScript
2020-02-18 14:09:43 +00:00
Mike Brady
85ba78b619
More fixes to allow gcc-10 to compile without error
2020-02-13 17:57:30 +00:00
Mike Brady
ec665d9be4
Change from talking about a server to talking about a client. Technically, e.g. iTunes is a client of Shairport Sync.
2020-01-10 17:21:55 +00:00
Mike Brady
1f75fe4e7a
Add or update some of the copyright notices
2019-12-27 14:37:01 +00:00
Mike Brady
fe8198a23b
Add SetAirplayVolume to the D-Bus RemoteControl interface.
...
Add SetVolume to the MPRIS interface.
Hook up the Volume property in the MPRIS interface.
Modify RemoteCommand in the D-Bus interface to return the HTTP status and response.
Change the type of airplay_volume from int to double in the metadata hub.
Add a few sample commands in the D-Bus document.
2019-12-20 17:17:21 +00:00
Mike Brady
f2930387b3
Add D-Bus convolution filter controls; enable convolution filters to be turned on and off or changed; enable convolution gain to be checked and changed.
2019-11-11 21:45:29 +00:00
Mike Brady
2f2442f4aa
Fix D-Bus loudness switch silencing output. Rename LoudnessFiulterActive to Loudness. Add Convolution, ConvolutionGain and ConvolutionImpulseResponseFile properties to the D-Bus interface.
2019-11-10 18:05:59 +00:00
Mike Brady
db8f10cfa1
add the option (normally on) of including the file name and line number of the originrating message in a debug log message
2019-09-17 12:14:55 +01:00
Mike Brady
839c778a7c
Only send shuffle commands if a change is necessary
2019-09-08 15:53:52 +01:00
Mike Brady
86b6d7bfff
Squashed commit of the following:
...
Fix Issue #890 -- https://github.com/mikebrady/shairport-sync/issues/890
Recognise situation where a track has no artwork properly.
Less likely to drop the 'availabile' property.
Always output the full metadata whenever any part of it has changed.
Metadata coming from dacp is now incorporated,
2019-08-29 11:47:49 +01:00
Chris Boot
b9cf91b2bb
More typo fixes across the tree
...
Previously I have made spelling changes as caught by Debian's lintian
tool, which has a short list of common misspellings that it tests for.
This time I decided to run codespell against the source and fix all the
obvious problems it came up with. It also uses a list of misspellings
but it's much larger than lintian's, but also has some false positives
so I went over the list by hand.
The command I used to do check the source was:
git ls-tree -rz --name-only HEAD | xargs -0 codespell -L minimise,errorstring
2019-07-27 00:05:38 -03:00
Mike Brady
c8b0be30b4
find . \( -name \*.cpp -or -name \*.h -or -name \*.c \) -exec clang-format -i -style='{BasedOnStyle: llvm, IndentWidth: 2, ColumnLimit: 100}' '{}' \;
2019-06-19 19:06:54 +01:00
Mike Brady
83c0405d03
Add automatic bit depth and speed selection for alsa devices. Set rate and format to "auto" by default. Always look for the greatest bit depth, but the lowest multiple of 44,100.
...
Improve support for big-endian CPUs by adding support for explicit -endian formats, i.e. S16_LE, S16_BE, S24_LE, S24_BE, S32_LE, S32_BE.
For the "disable_standby_mode" setting, change "while_active" to "auto".
2019-05-07 10:19:04 +01:00
Mike Brady
848467a817
Add "auto" interpolation support to the dbus interface.
2019-04-28 21:39:42 +01:00
Mike Brady
f74e2c2c96
Revert some experimental changes made to explore problems with Cygwin D-Bus access.
2019-02-27 12:53:09 +00:00
Mike Brady
d3d86d6192
Try to get a private connection to the system D-Bus
2019-02-20 18:43:10 +00:00
Mike Brady
405a028f33
quieten some exiting debug messages
2019-02-16 19:44:25 +00:00
Mike Brady
5af6179875
use the term'state' rather than 'mode' when taling about the active state. Use 'while_active' rather than 'while active'
2019-02-12 15:47:10 +00:00
Mike Brady
97a4766e93
Add call to check if the dbus service is started.
2019-02-08 22:31:50 +00:00
Mike Brady
34351a99cb
Continue hooking up active mode and disable standby stuff
2019-02-08 16:57:39 +00:00
Mike Brady
2e4428538d
Add an "active" mode that can time out after a period -- 10 seconds by default -- after play ends.
2019-01-21 21:43:55 +00:00
Mike Brady
a74261bbd3
Add a D-Bus property "DisableStandby" to turn standby oo or off.
2019-01-11 14:48:00 +00:00
Mike Brady
c9b3d2a2f4
Many changes to compilation and linking flags. Stop using HAVE_* flags except where necessary, use CONFIG_* for optional stuff, use HAS_* for immediate definitions, use USE_* for AM definitions. Probably introduced bgs, sigh.
2018-09-09 20:41:31 +01:00
Mike Brady
69642bb7de
Partly clean up use of automake, autoconfig and compiler flags. Works but still not consistent.
2018-09-09 14:12:20 +01:00
Mike Brady
5141e2f5dc
Format tidy-up
2018-08-14 12:14:49 +01:00
Mike Brady
df18e3a017
Add the ability to read and change the stuffing threshold
2018-08-13 14:05:14 +01:00
Mike Brady
4590b08e62
Fix a bug whereby libsoxr-required code wasn't included, causing soxr interpolation to be disabled.
2018-08-08 09:04:58 +01:00
Mike Brady
c85e7e05d1
Add a frames per second output. This should be exact if the machine is connected up to, say, an NTP time service. It uses CLOCK_MONOTONIC time.
2018-07-28 19:02:02 +01:00
Mike Brady
f1d4503431
Try to add proper cancellation code to all threads -- not complete, buggy.
2018-07-20 13:50:38 +01:00
Mike Brady
c8c70b6016
Add quit commands to the MPRIS and native D-Bus command set. Not tested ecologically.
2018-07-18 15:32:07 +01:00
Mike Brady
a4eaace76b
Begin to try to get Shairport Sync to quit cleanly, relinquishing memory and ports etc. properly so that valgrind can be more useful.
2018-07-17 10:28:06 +01:00
Mike Brady
c2e3fa5aa7
Move ab_mutex, flow control CV and flush mutex initialisation and teardown out of the player thread. Thus remove need for player theread lock. Format some of the surce files.
2018-07-14 13:38:29 +01:00
Mike Brady
7d446832bf
Quieten some debug messages
2018-06-21 18:04:24 +01:00
Mike Brady
365843faa6
beginning to add a progress string item to the native dbus interface
2018-06-21 17:44:26 +01:00
Mike Brady
08a7d4ffb5
Use snprintf in place of sprintf.
2018-04-08 15:36:05 +01:00
Mike Brady
8bf83c149f
Modify latency detection to use the second word of a sync packet to decide whether to add an extra delay or not. Use all sync packets, not just one with the exception flag. Use 1024 buffers -- a bit profligate, but hey.
2018-04-02 16:42:46 +01:00
Mike Brady
cb69c1dd2e
Take in track metadata but discard it if it's invalid (i.e. has a given mper ID of 0.
2018-04-01 16:09:53 +01:00
Mike Brady
07b7e64a48
Fix some of the advanced remote code
2018-04-01 13:54:41 +01:00
Mike Brady
69b3b5d776
Send rtsp events to the metadata thteread for handling. Begin to clean up signals.
2018-03-31 12:39:26 +01:00
Mike Brady
8094bb4d6f
Remove unneeded check for initialisation.
2018-03-29 17:23:22 +01:00
Mike Brady
051326b488
Quieten some unnecessary D-Bus property-changed chatter
2018-03-29 17:17:50 +01:00
Mike Brady
cbbe84d8ba
Add some more D-Bus facilities. Countermand faulty D-Bus commands.
2018-03-24 17:48:32 +00:00
Mike Brady
03aefda050
Reorder stuff when the dbus interface is being initialised to hok up the responses before making any changes
2018-03-23 21:39:47 +00:00
Mike Brady
340e365a62
Format after adding a few new elements ot the native dbus interface
2018-03-23 21:29:38 +00:00
Mike Brady
6dc30c6ca9
Add a few new elements ot the native dbus interface
2018-03-23 21:28:28 +00:00
Mike Brady
8453778a13
Move DACP volume detection and control to a new Advanced Remote Control D-Bus stanza.
2018-03-21 22:37:35 +00:00
Mike Brady
49a9cb9dfc
Remove the work "basic" from descriptions of the remote control.
2018-03-20 17:00:50 +00:00
Mike Brady
d692fab9e4
Clean up native dbus interface files and associated changes to existing files.
2018-03-20 16:31:59 +00:00
Mike Brady
Mike Brady
Chris Boot