Enable the AirPlay 2 build to operate an optional classic-AirPlay-only service or to gracefully degrade to classic AirPlay, as follows:
1. Add a new command-line option '-—service-type=<type>' and an equivalent configuration entry 'service_type = "<type>"' in the 'general' section of the configuration file,
where <type> can be "auto", "classic" or "airplay2":
1. "auto" (default) means that the service will be AirPlay 2 if NQPTP is running. If NQPTP is not running, classic AirPlay service will be provided instead, and in that case,
"(Classic)" will be appended to the default AirPlay service name visible to AirPlay clients like Apple Music, for example "RaspberryPi3B (Classic)".
2. "classic" means the service will be classic AirPlay (aka AirPlay 1).
3. "airplay2" means the service will be the modern AirPlay 2. In this case, as distinct from "auto", if NQPTP is not running, Shairport Sync will log an error and terminate.
2. In the systemd service file, NQPTP is now a "Want" rather than a "Require". If it's present, then it will be launched before Shairport Sync. If it's absent, Shairport Sync will launch anyway.
3. Improve the delivery of input format changes and emit 'sdsc' metadata when changes occur.
4. Emit new format information in the log if statistics is enabled.
Docker Changes
1. Support for linux/arm/v6 has been dropped, as Docker is no longer supported.
2. NQPTP is not started in the AirPlay 2 Docker image if '--service-type=classic' or '--service-type=airplay1' is in the command line options at the end of the docker run command.
The purpose is to ensure that ports 319 and 320 are left alone when the AirPlay 2 image is set to provide Classic service only.
Note that setting the configuration file 'service_type' to 'classic' will not prevent NQPTP from starting up -- you must use the command line option.
3. A new "dev" target has been added. It is a large image containing the custom-built FFmpeg library, NQPTP, Avahi and D-Bus along with the Shairport Sync source and
all necessary development tools. When started, Avahi, D-Bus and NQPTP are all installed and running. The bash shell has also been added and is entered.
Stability Improvements
Reorganise session preemption to fully terminate the existing session before starting a new one.
Don't delay closing the event port to wait for it to be closed at the client end.
Add a safe_socket_close() function to ensure sockets are fully closed. Use -1 to designate closed rather than 0, to prevent attempts to reclose sockets, causing mayhem.
Re-order FFmpeg decommissioning during teardown.
1. check_classic_mac_basic.yml — update to latest macOS-latest
2. docker-on-push-tag-or-pr — dependant updates
3. FFTConvolver — fix a compilation warning when the DEBUG flag is turned off
4. Reorganise some source files — e.g. move most of the metadata stuff into a subdirectory
5. Remove unused special-purpose AirPlay 2 RC event handler.
6. Reorganise source files and source code relating to the standard event handler.
7. Check configuration settings a little more carefully to offer more meaningful diagnostics.
8. Add password to AirPlay 2 and reorganise initialisation to set AirPlay 2 flags accordingly. Also, remove redundant airplay_pin.
9. Remove redundant debug facility definitions from common.h
10. Make it possible to omit all the dacp stuff from a build.
11. Make it possible to omit metadata multicast from a build.
12. Add AP2-native metadata by setting bit 50 of features to true.
13. Improve stability when pre-empting an existing play session.
14. Fix a few compiler warnings in the pair_ap library.
15. Ensure that the audio format is known before starting synchronisation.
16. Improve handle_configure to set/clear a new config setting. Doesn’t seem to do anything…
17. Experimentally turn off bit 46 of AirPlay 2 features — seems to stop failing pair-verify attempts.
New Features:
Multi-Channel and High-Resolution Audio Support
48,000 frames per second ("48k") operation.
48k lossless stereo support.
5.1 and 7.1 surround sound support.
Multi-channel and multi-rate operation on ALSA, PipeWire, PulseAudio, FreeBSD, stdout and Unix pipe output backends.
Automatic Audio Format Selection
Flexible and controllable output format selection.
Automatic rate, sample format, and channel count selection.
Full FFmpeg Integration
Support for transcoding.
Advanced resampling capabilities.
New audio format support.
Enhanced Resampling
New vernier resampling and interpolation method optimized for low-power CPUs.
Better performance on resource-constrained devices.
Convolution and Loudness Enhancements:
Convolution system is now multithreaded and works on stereo and multichannel audio at 48k and 44.1k.
Multiple impulse response (IR) files can now be provided via convolution_ir_files setting.
New convolution_thread_pool_size setting for multithreaded processing (defaults to 1).
Loudness processing now works with stereo and multichannel audio at 48k and 44.1k.
Updated to the most recent HiFi-LoFi FFT convolver.
MQTT Enhancements:
Added new publish_retain boolean option. When enabled, published MQTT messages have the retain flag set, so the MQTT broker stores the last message per topic and new subscribers receive the most recent value immediately. Thanks to lululombard for PR #2142.
D-Bus Enhancements:
Added new dbus_default_message_bus command-line argument (can be system or session) to set the default message bus for both D-Bus native service and MPRIS service.
Performance Improvements:
Enhanced compatibility with AirPlay 2 AutoMix and Smart Tracklists resulting in less unexplained track skipping.
Better operation on low-power devices down to Raspberry Pi B.
Improved efficiency on embedded systems.
Enhanced timestamp handling for better synchronization.
Improved sync error calculation.
Rebuilt buffered audio processor for cleaner handling of immediate and deferred flush requests.
Docker Enhancements:
Reduced Docker image sizes with slimmed-down FFmpeg library.
Removed dhclient from Docker images for smaller footprint.
Bug Fixes:
Fixed MQTT warning on service startup: "Could not establish a mqtt connection". The startup script now correctly states that the mosquitto service is required. Thanks to Hugo Villeneuve for PR #2137.
Fixed compatibility with mbedtls library version 3.4+ (present on recent Linux versions). Thanks to Christian Beier for finding and fixing the bug.
Fixed PulseAudio backend so that PA_ERR_NODATA returns "No latency data yet". Thanks to Vladimir Shakov for the report and fix.
Ensured old flush requests are deleted when a new play session starts. Thanks to saujanyashah for the report.
Fixed format warnings on 64-bit and 32-bit systems
Removed compilation warnings on 32-bit builds
Improved argument checking for debug(), inform(), warn() and die() functions
Fixed "daemon" typos throughout codebase. Thanks to Chris Boot for PR #1981.
Added warning if a convolution impulse response file cannot be read due to bad path or permissions
Build System Improvements:
Unified service file with variable substitution for Avahi support, making it easier to add future service dependencies. Thanks to Hugo Villeneuve.
Network interface selection now only considers interfaces that are up, running and not loopback interfaces. Thanks to Carl Johnson for the suggestion.
Configuration File Changes and Deprecations
New settings: convolution_ir_files (replaces convolution_ir_file), convolution_enabled (replaces convolution), convolution_max_length_in_seconds (replaces convolution_max_length), loudness_enabled (replaces loudness).
New convolution_thread_pool_size setting (defaults to 1).
Deprecated settings: convolution_ir_file, convolution, convolution_max_length, loudness.
Corresponding D-Bus methods and properties have been updated.
Deprecation Notice:
The Jack Audio and soundio backends are deprecated and will be removed in a future release. Consider using the updated PipeWire backend instead.
Documentation Updates
Updated BUILD.md with latest build instructions.
Updated AIRPLAY2.md with feature information.
Enhanced convolution and loudness documentation.
Maintenance:
Fixed FFmpeg deprecation warnings.
Bumped actions/checkout from 6.0.1 to 6.0.2.
Bumped docker/login-action from 3.6.0 to 3.7.0.
Bumped docker/build-push-action from 6.13.0 to 6.15.0.
Bumped docker/setup-qemu-action from 3.4.0 to 3.6.0.
Bumped docker/setup-buildx-action from 3.9.0 to 3.10.0.
Mike BradyandGitHub
dependabot[bot]andGitHub