From aa83a7ad399267dccc26888c1d27bb88e4de3c6d Mon Sep 17 00:00:00 2001 From: Mike Brady <4265913+mikebrady@users.noreply.github.com> Date: Mon, 15 Aug 2022 16:30:05 +0100 Subject: [PATCH] Update CAR INSTALL.md --- CAR INSTALL.md | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/CAR INSTALL.md b/CAR INSTALL.md index b8e8360f..cd76b613 100644 --- a/CAR INSTALL.md +++ b/CAR INSTALL.md @@ -28,7 +28,10 @@ Please note that some of the details of setting up networks are specific to the dtoverlay=hifiberry-dac ``` - Close the file and carefully dismount and eject the two drives. Remove the SD card from the Linux machine, insert it into the Pi and reboot. After a short time, the Pi should appear on your network and you can SSH into it. To check that it has appeared on the network, try to ping it at the hostname you gave it appended with `.local`, e.g. if the hostname is `bmw` then try `bmw.local`. It may take a minute or so to appear. Once it has appeared on your network you can SSH into it and configure it. +* Close the file and carefully dismount and eject the two drives. +* Remove the SD card from the Linux machine, insert it into the Pi and reboot. + +After a short time, the Pi should appear on your network and you can SSH into it. To check that it has appeared on the network, try to ping it at the `.local`, e.g. if the hostname is `bmw` then use `bmw.local`. It may take a minute or so to appear. Once it has appeared on your network you can SSH into it and configure it. ### Boot, Configure, Update The first thing to do on a Pi would be to use the `raspi-config` tool to expand the file system to use the entire card. Next, do the usual update and upgrade: