From a129b63706f828b908c5b0db95837699288c353b Mon Sep 17 00:00:00 2001 From: Mike Brady Date: Wed, 30 Apr 2014 21:43:48 +0100 Subject: [PATCH] Update README.md --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 0952154d..fbf9950a 100644 --- a/README.md +++ b/README.md @@ -57,11 +57,11 @@ The `'L'` setting is for the amount of latency -- the units are frames, with 44, Examples -------- -In the following are examples of the Raspberry Pi and the NSLU2, little-endian and a big-endian ARM systems running OpenWrt. The first is an example of a standard Ubuntu based laptop. For a Ubuntu laptop: +In the following are examples of the Raspberry Pi and the NSLU2, little-endian and a big-endian ARM systems running OpenWrt. But the first is an example of a standard Ubuntu based laptop, defaulting to device `0`: `shairport -d -L 99000 -a "Shairport"` -For best results, you should access the hardware volume control as shown in the following examples. Use alsamixer or similar to find out the name of the volume controller to be used after the `-c` option. For a Raspberry Pi using its internal soundcard that drives the headphone jack: +For best results, you should access the hardware volume control as shown in the following examples. Use `alsamixer` or similar to find out the name of the volume controller to be used after the `-c` option. For a Raspberry Pi using its internal soundcard that drives the headphone jack: `shairport -d -L 99000 -a "Shairport" -- -d hw:0 -t hardware -c PCM`