189 lines
7.1 KiB
YAML
189 lines
7.1 KiB
YAML
services:
|
|
ebusd:
|
|
image: john30/ebusd
|
|
container_name: ebusd
|
|
restart: unless-stopped
|
|
ports:
|
|
- 8888:8888
|
|
# when enabling the HTTP port, add it to the published ports as well:
|
|
#- 8080:8080
|
|
devices:
|
|
# when using an USB device, make sure to hand it in to the container like this:
|
|
- /dev/ttyUSB0:/dev/ttyUSB0
|
|
environment:
|
|
# Device options:
|
|
|
|
# Use DEV as eBUS device ("enh:DEVICE" or "enh:IP:PORT" for enhanced device, "ens:DEVICE" for enhanced high speed
|
|
# serial device, "DEVICE" for serial device, or "[udp:]IP:PORT" for network device)
|
|
EBUSD_DEVICE: "/dev/ttyUSB0"
|
|
# Skip serial eBUS device test
|
|
#EBUSD_NODEVICECHECK: ""
|
|
# Only read from device, never write to it
|
|
#EBUSD_READONLY: ""
|
|
# Send an initial escape symbol after connecting device
|
|
#EBUSD_INITSEND: ""
|
|
# Extra transfer latency in ms
|
|
#EBUSD_LATENCY: 40
|
|
|
|
# Message configuration options:
|
|
|
|
# Read CSV config files from PATH (local folder or HTTPS URL)
|
|
#EBUSD_CONFIGPATH: "/path/to/local/configs"
|
|
# Pick CSV config files matching initial scan (ADDR="none" or empty for no initial scan message, "full" for full
|
|
# scan, or a single hex address to scan, default is broadcast ident message).
|
|
EBUSD_SCANCONFIG: ""
|
|
# Prefer LANG in multilingual configuration files
|
|
#EBUSD_CONFIGLANG: "en"
|
|
# Poll for data every SEC seconds (0=disable)
|
|
#EBUSD_POLLINTERVAL: 10
|
|
# Use CA FILE for checking certificates (uses defaults, "#" for insecure)
|
|
#EBUSD_CAFILE: "/path/to/cafile"
|
|
# Use CA PATH for checking certificates (uses defaults)
|
|
#EBUSD_CAPATH: "/path/to/cafiles"
|
|
|
|
# eBUS options:
|
|
|
|
# Use ADDR as own bus address
|
|
#EBUSD_ADDRESS: ff
|
|
# Actively answer to requests from other masters
|
|
#EBUSD_ANSWER: ""
|
|
# Stop bus acquisition after MSEC ms
|
|
#EBUSD_ACQUIRETIMEOUT: 10
|
|
# Retry bus acquisition COUNT times
|
|
#EBUSD_ACQUIRERETRIES: 3
|
|
# Repeat failed sends COUNT times
|
|
#EBUSD_SENDRETRIES: 2
|
|
# Expect a slave to answer within MSEC ms
|
|
#EBUSD_RECEIVETIMEOUT: 50
|
|
# Expect COUNT masters on the bus, 0 for auto detection
|
|
#EBUSD_NUMBERMASTERS: 0
|
|
# Enable AUTO-SYN symbol generation
|
|
#EBUSD_GENERATESYN: ""
|
|
|
|
# Daemon options:
|
|
|
|
# Set default access level to LEVEL ("*" for everything)
|
|
#EBUSD_ACCESSLEVEL: "*"
|
|
# Read access control list from FILE
|
|
#EBUSD_ACLFILE: "/path/to/aclfile"
|
|
# Enable hex command
|
|
#EBUSD_ENABLEHEX: ""
|
|
# Enable define command
|
|
#EBUSD_ENABLEDEFINE: ""
|
|
# PID file name (only for daemon)
|
|
#EBUSD_PIDFILE: "/var/run/ebusd.pid"
|
|
# Listen for command line connections on PORT
|
|
#EBUSD_PORT: 8888
|
|
# Listen for command line connections on 127.0.0.1 interface only
|
|
#EBUSD_LOCALHOST: ""
|
|
# Listen for HTTP connections on PORT, 0 to disable
|
|
#EBUSD_HTTPPORT: 8080
|
|
# Path for HTML files served by HTTP port
|
|
#EBUSD_HTMLPATH: "/var/ebusd/html"
|
|
# Set automatic update check to MODE (on|off)
|
|
#EBUSD_UPDATECHECK: "on"
|
|
|
|
# Log options:
|
|
|
|
# Write log to FILE (only for daemon, empty string for using syslog)
|
|
#EBUSD_LOGFILE: "/var/log/ebusd.log"
|
|
# Only write log for matching AREA(S) below or equal to LEVEL (alternative to EBUSD_LOGAREAS/EBUSD_LOGLEVEL, may
|
|
# be used multiple times)
|
|
#EBUSD_LOG: "all:notice"
|
|
# Only write log for matching AREA(S): main|network|bus|update|other|all
|
|
#EBUSD_LOGAREAS: "all"
|
|
# Only write log below or equal to LEVEL: error|notice|info|debug
|
|
#EBUSD_LOGLEVEL: "notice"
|
|
|
|
# Raw logging options:
|
|
|
|
# Log messages or all received/sent bytes on the bus
|
|
#EBUSD_LOGRAWDATA: ""
|
|
# Write raw log to FILE
|
|
#EBUSD_LOGRAWDATAFILE: "/var/log/ebusd.log"
|
|
# Make raw log file no larger than SIZE kB
|
|
#EBUSD_LOGRAWDATASIZE: 100
|
|
|
|
# Binary dump options:
|
|
|
|
# Enable binary dump of received bytes
|
|
#EBUSD_DUMP: ""
|
|
# Dump received bytes to FILE
|
|
#EBUSD_DUMPFILE: "/tmp/ebusd_dump.bin"
|
|
# Make dump file no larger than SIZE kB
|
|
#EBUSD_DUMPSIZE: 100
|
|
# Flush each byte
|
|
#EBUSD_DUMPFLUSH: ""
|
|
|
|
# MQTT options:
|
|
|
|
# Connect to MQTT broker on HOST
|
|
#EBUSD_MQTTHOST: "localhost"
|
|
# Connect to MQTT broker on PORT (usually 1883), 0 to disable
|
|
#EBUSD_MQTTPORT: 1883
|
|
# Set client ID for connection to MQTT broker
|
|
#EBUSD_MQTTCLIENTID: "ebusd"
|
|
# Connect as USER to MQTT broker (no default)
|
|
#EBUSD_MQTTUSER: "some-user"
|
|
# Use PASSWORD when connecting to MQTT broker (no default)
|
|
#EBUSD_MQTTPASS: "some-password"
|
|
# Use MQTT TOPIC (prefix before /%circuit/%name or complete format)
|
|
#EBUSD_MQTTTOPIC: "ebusd"
|
|
# Use TOPIC for global data (default is "global/" suffix to mqtttopic prefix)
|
|
#EBUSD_MQTTGLOBAL: "ebusd/global/"
|
|
# Retain all topics instead of only selected global ones
|
|
#EBUSD_MQTTRETAIN: ""
|
|
# Set the QoS value for all topics (0-2)
|
|
#EBUSD_MQTTQOS: 0
|
|
# Read MQTT integration settings from FILE (no default)
|
|
#EBUSD_MQTTINT: "/etc/ebusd/mqtt-hassio.cfg"
|
|
# Add variable(s) to the read MQTT integration settings
|
|
#EBUSD_MQTTVAR: "key=value"
|
|
# Publish in JSON format instead of strings, optionally in short (value directly below field key)
|
|
#EBUSD_MQTTJSON: ""
|
|
# Publish all available attributes
|
|
#EBUSD_MQTTVERBOSE: ""
|
|
# Log library events
|
|
#EBUSD_MQTTLOG: ""
|
|
# Use protocol VERSION
|
|
#EBUSD_MQTTVERSION: "3.1"
|
|
# Ignore invalid parameters during init (e.g. for DNS not resolvable yet)
|
|
#EBUSD_MQTTIGNOREINVALID: ""
|
|
# Whether to only publish changed messages instead of all received
|
|
#EBUSD_MQTTCHANGES: ""
|
|
# Use CA file or dir (ending with '/') for MQTT TLS (no default)
|
|
#EBUSD_MQTTCA: "/path/to/cafile"
|
|
# Use CERTFILE for MQTT TLS client certificate (no default)
|
|
#EBUSD_MQTTCERT: "/path/to/certfile"
|
|
# Use KEYFILE for MQTT TLS client certificate (no default)
|
|
#EBUSD_MQTTKEY: "/path/to/keyfile"
|
|
# Use PASSWORD for the encrypted KEYFILE (no default)
|
|
#EBUSD_MQTTKEYPASS: "some-passwort"
|
|
# Allow insecure TLS connection (e.g. using a self signed certificate)
|
|
#EBUSD_MQTTINSECURE: ""
|
|
|
|
# KNX options:
|
|
|
|
# URL to open (i.e. "[multicast][@interface]" for KNXnet/IP)
|
|
#EBUSD_KNXURL: ""
|
|
# Maximum age in seconds for using the last value of read messages (0=disable)
|
|
#EBUSD_KNXRAGE: 30
|
|
# Maximum age in seconds for using the last value for reads on write messages (0=disable),
|
|
#EBUSD_KNXWAGE: 7200
|
|
# Read KNX integration settings from FILE
|
|
#EBUSD_KNXINT: "/etc/ebusd/knx.cfg"
|
|
# Add variable(s) to the read KNX integration settings
|
|
#EBUSD_KNXVAR: "address=1.1.1"
|
|
|
|
# when using the optional mqtt container below, add the dependency here:
|
|
#depends_on:
|
|
# - mqtt
|
|
|
|
# optional container for having an MQTT broker inside the composition as well:
|
|
# mqtt:
|
|
# image: eclipse-mosquitto
|
|
# restart: unless-stopped
|
|
# ports:
|
|
# - 1883:1883
|
|
# - 9883:9883
|
|
# |