Delete README.md

README.md

@@ -1,111 +0,0 @@
-ebusd - README
-==============
-
-Daemon to communicate with the heating system via ebus
-
-
-Gerneral Information
-====================
-
-ebus (energy bus) is a serial communication protocoll used in heating systems. 
-
-ebusd acts like a proxy. On the one hand it is listing on a TCP port 8888 for
-incoming telnet connections. On the other hand it sends and receive ebus message
-via ebus-usb adapter to or from the ebus.
-
-
-Features:
-=========
-
- * ebus - send and receive ebus commands
-   - send Broadcast (BC), Master-Master (MM) and Master-Slave (MS) messages
-   - calculate CRC for sending data and check CRC of received data
-   - not allowed byte sequences inside data will be escaped and unescaped
-   - it saved data from specified cycle messages
-   
- * telnet - multi telnet session (listen on TCP port 8888)
-   The available commands are different of each heating system and provider.
-   This commands are defined in csv files which will be parsed on daemon startup.
-   
-   Commands:
-   - get        send message (BC, MM or MS) to slave and decoded received answer
-   - set        send data to the slave with the intention to adjust this value
-   - cyc        return data from collected cycle messages
-   - loglevel   change loglevel at runtime
-   - quit       disconnect from daemon
-   - shutdown   stop daemon
-   
-
-Build:
-======
-
-$ ./autogen.sh
-
-This script execute the following commands in this order.
-
-$ aclocal
-$ autoconf
-$ autoheader
-$ automake
-$ ./configure
-$ make
-
-
-Daemon Configuration:
-=====================
-
-The daemon will search ist configuration file ebusd.conf primary at /etc/ebusd.
-This can be override by given commandline option -C. For detailed help of daemon
-configuration try ./ebusd -h or take a look at ebusd.conf file.
-
-
-
-Command Configuration:
-======================
-
-In short some description to the neccassarry structure of the csv files.
-
- * [    3] type     - type of command (get, set, cyc)
- * [    5] class    - comand class (ci, ...)
- * [   30] cmd      - command (password, ...)
- * [  256] com      - description of the command
- * [  int] s_type   - ebus message type (BC = 1, MM = 2 or MS = 3)
- * [    2] s_zz     - hex address from slave  (15)
- * [    4] s_cmd    - primary and secendory ebus command (e.g. B509)
- * [  int] s_len    - length of data bytes
- * [   32] s_msg    - data bytes of message
- * [  int] d_elem   - number of elements from different data types
-
-For each different data type must defined the follow struture
-
- * [   20] d_sub    - subcommand (pin1, ...)
- * [    2] d_part   - part of message for data bytes (MD, SA, SD, MA)
- * [   10] d_pos    - position at data bytes (1, 2, 3, ...)
- * [    3] d_type   - data type (asc, bcd, ...))
- * [float] d_fac    - facter to scale data (1.0, 0.02, ...)
- * [    6] d_unit   - unit of data (°C, ...)
- * [   30] d_valid  - possible entrys (01, 02, 03, ...)
- * [  256] d_com    - description of sub command
-
-
-Different data types [decode|encode]:
-
- * [de] x - asc - ascii
- * [de] 1 - bcd - bcd
- * [de] 1 - d1b - data1b
- * [de] 1 - d1c - data1c
- * [de] 2 - d2b - data2b
- * [de] 2 - d2c - data2c
- * [d ] 3 - bda - date (bcd format)
- * [de] 3 - hda - date (hex format)
- * [d ] 3 - bti - time (bcd format)
- * [de] 3 - hti - time (hex format)
- * [d ] 1 - bdy - day (bcd format)
- * [de] 1 - hdy - day (hex format)
- * [d ] x - hex - print data only with 2-nibble hex format
- * [d ] 4 - ulg - unsigned long
-
-
-
-The author can be contacted at roland.jax@liwest.at.
-