From 080fa1bf672d24ef84ed4b692dacb54e7c0545b0 Mon Sep 17 00:00:00 2001 From: John Date: Sat, 14 May 2022 08:24:59 +0200 Subject: [PATCH] add read info to active write messages --- contrib/etc/ebusd/knx.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/contrib/etc/ebusd/knx.cfg b/contrib/etc/ebusd/knx.cfg index cb62ff01..765d8484 100644 --- a/contrib/etc/ebusd/knx.cfg +++ b/contrib/etc/ebusd/knx.cfg @@ -8,7 +8,7 @@ # Setting the addresses via ETS is not (yet) possible as well as setting the physical address. # All entries are set to group address flags as follows: # - for read and passive write messages: "Read", "Transmit" -# - for active write messages: "Write", (no "Update") +# - for active write messages: "Write", "Read" (only answered when value was written before via KNX or eBUS), no "Update" # The physical address depends on how knxd is configured and might change each time ebusd and/or knxd is restarted when # a range of possible client addresses were configured on knxd side (which is recommended when there is more than one